Is Kaama Ready?????
 

Mark are you ready yet? I'm ready for a ride in a real boat....Winterizing the "good" motor tonight ....pulling the other soon....

Cripes. KAAMA oughta just winterize 'em now. It's gonna be snowmobile suit weather too soon. All things considered, I shoulda just towed my boat to the slip last spring instead of running it. Could saved myself the heartache of filling 'em with green antifreeze.:D

boys..boys ....boys.. we still have a good month of boating left :D and the plus side is the motors love cold air :cool:

Travis----now I think that was as EXCELLENT point! In fact it's supposed to get back up into the near 70's or so this week and weekend from what I heard.

Anyway gang, we've got the steering all primed and set and is fully functional now. I just went and got a new fuel line and that one leaks too!----must be a bad batch of them, but we're going to cut our own braided hose and try that. Engines idle at about 775-825rpm and are VERY responsive when I crack the throttle! I still need to replace the water temp gauges. One came today and the other I still have to pick up from SuperV. So a water test is in order for tomorrow if we can make it to the launch before dark----might take it over near where Dyno lives and rattle his cage with my Stellings. :D :) :D :eek: :D

When are you going Mark? I live a mile from that launch and can come out and watch. I won't be home until 6 or so, but can be in the water in a heartbeat.

Mitch, we will probably be there right around 6pm or so I would think. If we water test it, that's probably going to be the place we're going to do it because it's the closesest launch to my shop. Might be a good idea to have a chase boat, so if you decide to show up we will see you there. Mitch, if there is a possibility that you can make it could you please bring your digital camera too? thanks. :)

I'm quite sure dandy dyno Don will be there too! :rolleyes: :p :D

That sounds good. I will get there as fast as I can with the camera.

hey guys I'm home today with a sick daughter...I'll try to get to the launch tonight, Rachel gets home around 5:30-6:00!

Kaama, I'll be working on the sketches we talked about for your hatch, tonight. You will hear from me soon on the PM. Good luck.

Mitcher T.:D

I'll call the cop shop and tell them to be ready with their sound meter. Hey, Waterfoul could bring the Allegan County Silent Choice exhaust that Team Chaos uses to test fire the Double D engines.

Ha Kamma, I have to go to the doctor tomorrow and I think he is going to cut on my toe. If it's not to bad we might put in at St. Joe saturday to run some fuel out. If your down that way we can hang out. I'll call you after my apointment and see whats up. Later :) Doug

If the water test goes okay tonight, I will be taking the day off tomorrow and take the boat down to St.Joseph. I just got off the phone with 29Scarab(Shawn) and he might come up to Holland tonight. Thing is, I told him I don't know how things are going to go with the first water test. I promised him a ride and I want to make good on my promise, there's also a good chance he will get a ride from me tomorrow (Friday).

Doug, I might go for a quick ride on Saturday but it's looking like rain possibly---cold front w/winds coming in from the northwest.

Thanks for all the support gang, I'm believing for everything to go well.

Bout time I got that hog in the water! :)

I can give him a ride:D It is not as fast or load but it floats. See ya there, it should be a great night. See ya about 6.

KAAMA just called me from a jobsite and asked me to post that he WILL NOT be able to sea-trial the boat today because the temp gauges sent to him by Gaffrig are the wrong ones. The correct gauges are being overnighted to him and weather permitting, the sea-trial should be tomorrow. I'm sure he will post when he gets home.

He called me also and filled me in. That just sucks!!:mad:


Hopefully the right ones will be in tomorrow!!

:D :cool:

I've been without a boat for 2 1/5 months!! I'm joansen for ride!!!


:D :D

gauges we dont need no stinking gauges!!!!!

Hey gang, just got home. I was figuring that Gaffrig sent me the right gauges until I opened the box at the last minute. They sent me the smaller 2" gauges and I needed the 2.5/8" gauges---what a bummer---took the wind right out of my sails.

Anyway, we put ANOTHER new fuel line on and fired the Port engine and that one leaked too! These are Allstar brand braided fuel line and anodized fittings (they sure all look the same to me). We took the first fuel line and fittings back and were given another new one. That one leaked too! We didn't know if the fittings weren't tight enough on the hose ends so we took them off and reinstalled the ends---still leaked. Finally, we found out that they were leaking from the little pin holes that are manufactured into the fitting ends. I had two more straight -8 fittings from Areoquip that were new in the box left over from the entire boat project. We took the Allstar brand fuel line and removed the fittings and then installed the Areoquip fittings on the hose ends---we then installed the fuel line back on the carb and fired the engine and let it run for a few minutes----no leaks finally! The guy working on my boat said that Areoquip has a patend design on their fittings----they all look the same to me, but the Areoquips sure didn't leak once we installed them!

Anyway gang, gauges from Gaffrig should be here tomorrow. I think I talked to "Ed" at Gaffrig and he listen to me cry about my gauges and was very kind and helpful.

Now then, perhaps I can attempt to do this again tomorrow.

Shawn, I'll be calling you bro.

Mitch and the rest of you, sorry about the false alarm....again! :rolleyes:

MitcherT, thanks bro, I'll be in touch soon!

Doctor Dave, thanks for getting my steering all primed, bleeded and running smooth. Took my boat to Doctor Daves shop last night to work on my steering---he had FOUR (4) TRS drives sitting there in his shop on drive stands from a customer who is having Doc rebuild them. They will be going on a 50' Cary with quads of course! :)

Door bell just rang---gauges & parts are here. It's a beautiful day and I'm heading for St. Joe. :)

you aint right.... why pull your boat 100 miles to sea trial when you have a launch about 7 miles from your shop????I cant help tonight anyway my Father in law's coming for dinner....hope all goes well thats a long way to go if something goes bad!!!!Naaaah it will be Great!!!!!!!see ya
Don