X Drive?
#11
Registered

Joined: Mar 2008
Posts: 3,611
Likes: 371
From: Traverse City MI
#12
Thread Starter
Registered
Joined: Sep 2012
Posts: 65
Likes: 0
From: Tehachapi, Ca
I read that this morning. Oh my. $35,000
a drive. The boat I'm looking at has badazz looking twins. I'll have to hire security to just watch the boat. Sure seem to be the schizz tho...
I like the fact that they're rare and unique.
Anybody can own an IMCO...
(thought I might liven things up)
a drive. The boat I'm looking at has badazz looking twins. I'll have to hire security to just watch the boat. Sure seem to be the schizz tho...
I like the fact that they're rare and unique.
Anybody can own an IMCO...
(thought I might liven things up)
#13
Registered
Joined: Dec 2008
Posts: 618
Likes: 4
I tried to call xpower and buy some drives about 14-16 months ago and couldn't get anywhere.
I'm running the SCX's with 1400 BP lowers with 6 shafts. I ran the same setup with a 1.3 gear and XR prop shafts before. IMCO's service is crazy. They rebuilt a drive for me in 3 days.
I'm running the SCX's with 1400 BP lowers with 6 shafts. I ran the same setup with a 1.3 gear and XR prop shafts before. IMCO's service is crazy. They rebuilt a drive for me in 3 days.
#14
Thread Starter
Registered
Joined: Sep 2012
Posts: 65
Likes: 0
From: Tehachapi, Ca
No argument from me on IMCO's service.
I boat at Lake Mead and had a steering ram of theirs spring a leak. Took it to them locally and they just handed me a new one, no charge. Probably just to get rid of my ugly face. You are running way more power than most no doubt. But you have had at least one of your drives rebuilt in less than 2 years? Including installation, rebuild, etc., how much do you have invested in your IMCO's?
I boat at Lake Mead and had a steering ram of theirs spring a leak. Took it to them locally and they just handed me a new one, no charge. Probably just to get rid of my ugly face. You are running way more power than most no doubt. But you have had at least one of your drives rebuilt in less than 2 years? Including installation, rebuild, etc., how much do you have invested in your IMCO's?
#15
Registered
Joined: Dec 2008
Posts: 618
Likes: 4
I do all my own work. I have a mega lift and a shop at my house. So labor is free.
I have 4 each SXC's with 1400 lowers. 1.5 gear with #6 prop shaft and 1.3 gear with XR shaft. I like to do a lot of setup testing. So about 60 in drives.
I broke one running offshore for 47 miles. I was running very hard working the throttles. When I got it on the trailer I spun one prop and it was crunchy. IMCO rebuilt it fast.
This is my boat http://www.offshoreonly.com/classifi...ng-o68700.html
I have 4 each SXC's with 1400 lowers. 1.5 gear with #6 prop shaft and 1.3 gear with XR shaft. I like to do a lot of setup testing. So about 60 in drives.
I broke one running offshore for 47 miles. I was running very hard working the throttles. When I got it on the trailer I spun one prop and it was crunchy. IMCO rebuilt it fast.
This is my boat http://www.offshoreonly.com/classifi...ng-o68700.html
#16
Thread Starter
Registered
Joined: Sep 2012
Posts: 65
Likes: 0
From: Tehachapi, Ca
Always wondered what heaven looked like.....well done and more than a nice badazz ride. That info helps a lot. With what you have invested you're still cheaper than two X Powers. Plus there's no price on IMCO's service. If I get a plane ticket, beer, fuel and general all around swabbie ....
maybe a ride someday?
Michael
maybe a ride someday?
Michael
#17
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 45
From: Ft. Worth TX
I do all my own work. I have a mega lift and a shop at my house. So labor is free.
I have 4 each SXC's with 1400 lowers. 1.5 gear with #6 prop shaft and 1.3 gear with XR shaft. I like to do a lot of setup testing. So about 60 in drives.
I broke one running offshore for 47 miles. I was running very hard working the throttles. When I got it on the trailer I spun one prop and it was crunchy. IMCO rebuilt it fast.
This is my boat http://www.offshoreonly.com/classifi...ng-o68700.html
I have 4 each SXC's with 1400 lowers. 1.5 gear with #6 prop shaft and 1.3 gear with XR shaft. I like to do a lot of setup testing. So about 60 in drives.
I broke one running offshore for 47 miles. I was running very hard working the throttles. When I got it on the trailer I spun one prop and it was crunchy. IMCO rebuilt it fast.
This is my boat http://www.offshoreonly.com/classifi...ng-o68700.html
#19
Registered
Joined: Dec 2008
Posts: 618
Likes: 4
Always wondered what heaven looked like.....well done and more than a nice badazz ride. That info helps a lot. With what you have invested you're still cheaper than two X Powers. Plus there's no price on IMCO's service. If I get a plane ticket, beer, fuel and general all around swabbie ....
maybe a ride someday?
Michael
maybe a ride someday?
Michael
BUP, yes I'm in Tarrant County. I have a place at Lake Texoma and Lake Travis. Plenty of big fast boats on both. I also do the FPC runs and go to Kemah a lot.
#20
Registered
Joined: Feb 2007
Posts: 946
Likes: 1
From: Franconia, PA


