|
Originally Posted by aquaforce
(Post 4539809)
I think I have read before that the Livorsi stuff would require all the senders also. I'm not rebuilding the boat so the engines are in the bilge and not where I can get to all the senders. I'll stay with just gauges for now. Thanks for the info.
The senders and guages need to have a matched ohm range. You probably only would have to change the oil psi senders(hard to get at on twins) and water temp senders(easy). |
Originally Posted by Griff
(Post 4540036)
It really all depends on what guage you have. Factory Merc senders will work with most Livorsi guages.
The senders and guages need to have a matched ohm range. You probably only would have to change the oil psi senders(hard to get at on twins) and water temp senders(easy). Interesting about the O.E. Merc senders. I will need to find out which senders I have. These are 97 502 MPI but the dash had VDO. That is something I need to qualify for sure if they are different. |
Livorsi sender match the Mercury senders. check out our website at www.livorsi.com
|
Originally Posted by livorsimarine
(Post 4546868)
Livorsi sender match the Mercury senders. check out our website at www.livorsi.com
Thanks. That is great info. |
| All times are GMT -5. The time now is 11:21 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.