|
Originally Posted by COOPS
(Post 4560035)
I put them under the cover for the ladder.
|
Last boat I left the plug in a cup holder right near my ignition switches along with the ring spanner to fit the plug. Every time I launched the boat, I'd see it sitting there so I couldn't forget!
RR |
Originally Posted by ALL_IN!
(Post 4559985)
Mine stay in the door pocket of my tow vehicle, along with the wrench I use to install/remove. If the quality of your roads are like they are around here, I would NOT suggest to put them on the trim tabs or hang by wire loop. ...unless you have an extra set in the door pocket on your tow vehicle! LOL
|
I drop them in an old camera film container....and then put that in the glove box.
|
I don't recall where I got it but I have a small plastic hub with 1/2 npt threads screwed to the bunk. Keeps it back, I have a system where I take transom satraps off and install plug. Have a 1.5" stainless spring pin thru the square head of the plug to add little leverage to install plug in the boat.
|
I keep an extra one on my dock for my friends that come by screaming they forgot to put their plug in. It is always worth a chuckle.
|
I keep mine in the prop box- boat's kept on a trailer @ the marina. I pull the prop after each use (keeps some other AH from doing it for me.) Also, I've got CRS so bad, I can't even remember what the letters stand for!
|
|
Originally Posted by Bill 3
(Post 4559980)
Mine typically ride on the K-plane. Haven't lost one yet.
|
1 Attachment(s)
I keep my boat in dri-stack and they just tie a small cotton drawstring bag on the transom and put it in the bag when they pull it out. Port side hanging by trim tab
|
| All times are GMT -5. The time now is 04:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.