Yes, follow Gary, (signature Instigator), on the Screamandfly forum.

https://cimg1.ibsrv.net/gimg/www.off...46acfbad5.jpeg
https://cimg4.ibsrv.net/gimg/www.off...07c1137e96.jpg

In case anyone is actually watching this thread….

Got the port motor mostly healthy and ran 76 MPH in 40* weather, freezing my ass off this fall.
Easy 80 w/the stock 225’s.

w/two hot rod motors I will build for it 👍🏻😎🏁🌴

I had some free time this fall so attacked the science project.

I thought my cabin galley ideas would make the cabin look smaller but I think it did the opposite.

I had to move the boat forward on the trailer to get the tongue weight back after the IO to OB conversion but I did and it worked.
Now tows straight and true at 80 MPH which is mandatory for long distance trips.





https://cimg4.ibsrv.net/gimg/www.off...b5b933417.jpeg

https://cimg5.ibsrv.net/gimg/www.off...45bce43ed.jpeg

https://cimg7.ibsrv.net/gimg/www.off...36896fbdd.jpeg
https://cimg9.ibsrv.net/gimg/www.off...ae17e6fac.jpeg

Looks good

Looks great!! I keep going back and forth between a checkmate and a formula, lol.

Should have added, 76 was w/92 gls of fuel too.

Good work love the cabin look inside with the wood

Outstanding!!!

Got a nice surprise yesterday.

If you look close, you can see narrow, black trim pc’s running horizontally at the seam of hull to deck.

I thought it would make a nice little, final touch if I replaced it w/the same stained mahogany as in the galley.
Would also tie the main cabinetry in w/the stained doors on the anchor locker.
(that will hold the 15 gl water/ballast tank)

I pulled it out yesterday and discovered that is teak!
Who paints teak black?!?

Ran it through the planer to strip the paint it looks great!

Awesome job brother!
I am constantly on the lookout for your next project.
Can’t wait to get the Checkmate down here to keep Elvis company, lol.

Don’t need no moh projects 🤪