Who makes wheels for a 03chevy dually
 

I just bought a2003 4x4 4dr 3500 chevy dually. i found one set of wheels that they say will fit. amercian d8 in 16s,chrome plated
,they dont look so hot.they were 275. each and 5. each lug. they say chevy changed the callipers on 2001 and up on the 3500 , front will not clear the callipers or center hub is will not fit over wheel.weld evo siad comming out with one but WD. is 525.00 each. 525.is alittle much for evey day truck.
has any body tried any thing else or know of any thing????

Go with the lift kit and the 22.5's. They are the baddest thing going right now for the 3500 duallys. I will post a picture as soon as I get the film developed. With the lift kit, there is no need to modify the wheel well openings and it looks killer.

Mike

ALCOA has just started production of a wheel for the late model Chevy dually's. I don't think that they are available for the general public yet, although I have seen a set. They will be on my truck as soon as they are available.
Robert

Rob : excellent choice !
if you are planning to change the height pls dont lift it ; DROP IT!

:)

w
 

i want to stick with the 16s. does alcoa chrome plate there wheels or clear coat. i dont want to be polishing all the time.
i realy dont want to lift the truck ,would rather lower it but beening a 4x4 prob just put larger tires on later.rite know just dressing up.

Rob,
Call Dave Anderson at ABD Racing. 909-351-9566. If he doesnt stock it...He'll find it. Tell him your on OSO.

Don't know how to link but check out

www.ricksontruck.com

They have some nice tire and wheel packages.

What about Weld Wheels?

Buck
#183

Rob, I put the new alcoa hot shot dually rims on my 02 chev. What I did was I bought rims for a 99 dually and had the center hub machined out 34 thousands, that is the only difference and they fit perfect. They have been on for 12,000 miles with no problems and they look great.

ttt