|
Originally Posted by BBYSTWY
(Post 4728904)
Bocatech switches if you want to spend a lot
I went through Billet Automotive Buttons...they are out of Australia...really cool dude easy to deal with...I'd go through them and just make your own panels since they are nice and flat...just my opinion..good luck |
I am in the process of new switches and going with these, happy with them as far as I am in the project but yes hard to get at the moment... blue sea is another option i found also but have no experience with them
https://www.bluewatergadgets.com/tri...hread-on-22mm/ https://www.bluesea.com/products/cat...utton_Switches |
Originally Posted by Unlimited jd
(Post 4728714)
New wire marine.
|
Originally Posted by IGetWet
(Post 4728858)
Get some carbon fiber sheet and start cutting!
I like the look of the stainless in the center of the switch but I think the push buttons with the wording or picture on it would be more beneficial at night. Then there wouldn’t have to be any printing on the panels itself either. https://www.cpperformance.com/c-176-...-switches.aspx Hearing all this corona virus this and that just makes me thirsty. Those are nice ! None in stock :( |
Originally Posted by BBYSTWY
(Post 4728904)
Bocatech switches if you want to spend a lot
I went through Billet Automotive Buttons...they are out of Australia...really cool dude easy to deal with...I'd go through them and just make your own panels since they are nice and flat...just my opinion..good luck |
I went with the Nordic dragon head in the middle of all the switches and what they are(blower, bilge, etc) on the outer rim...was very shocked at how clearly everything is etched on them...don't have a pic handy but can text you one later if you want to see them
|
Post a pic when you can. I want to see
|
Had the woman snap a couple pics of them for me....
https://cimg6.ibsrv.net/gimg/www.off...9bd3b7d7b.jpeg https://cimg9.ibsrv.net/gimg/www.off...72adcc5e9.jpeg |
What amperage are those rated at? I’ve found a bunch only rated at 3-5 amps
|
I wanna say 5 or 10...on the fuel switches and hatch switches I ran relays on them to make up for that...all my lights and everything are LED's so they don't draw hardly anything anyway...I specifically asked him about my underwater lights as they draw the most and he wasn't concerned at all and assured me they would be just fine.
|
| All times are GMT -5. The time now is 10:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.