Shop Recommendations
#1
Shop Recommendations
Im looking for a boat shop capable of finishing a performance motor install, Im in the Pensacola area but will travel as far south as Tallahassee and lower Alabama or Georgia. The boat has been in progress, its taken 3 years so far and Im just tired of waiting.
The motor is a 540 8.5:1 compression with a Vortech V7YSIB blower and a FAST XFi Marine system, Holley EFI Intake to a 102mm throttle body, CMI Headers and a Methanol injection system. The motor is in the boat, the plumbing from blower to intercooler to intake needs to be fabbed together, wire harness is already done to my knowledge..
The boat was originally setup by Keith Holmes at CK Motorsports (RIP) so everything thats there has been done right, I dont want to go a third summer with a boat that hasn't left the trailer.
Thank you in Advanced
The motor is a 540 8.5:1 compression with a Vortech V7YSIB blower and a FAST XFi Marine system, Holley EFI Intake to a 102mm throttle body, CMI Headers and a Methanol injection system. The motor is in the boat, the plumbing from blower to intercooler to intake needs to be fabbed together, wire harness is already done to my knowledge..
The boat was originally setup by Keith Holmes at CK Motorsports (RIP) so everything thats there has been done right, I dont want to go a third summer with a boat that hasn't left the trailer.
Thank you in Advanced
Last edited by 29Fever; 05-15-2020 at 02:16 PM.
#2
Registered
.
if you can drive a little further north to
Young Performance Marine
12049 Lebanon Rd
Mount Juliet, Tennessee 37122
I've heard lots of good things about him
.
if you can drive a little further north to
Young Performance Marine
12049 Lebanon Rd
Mount Juliet, Tennessee 37122
I've heard lots of good things about him
.
#3
Registered
,
also send a PM to OSO ID --> razorsedge
ask if he will do it
,
also send a PM to OSO ID --> razorsedge
ask if he will do it
,
The following users liked this post:
noli (05-16-2020)
The following users liked this post:
noli (05-16-2020)