Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Stainless -20 fitting wrench size >

Stainless -20 fitting wrench size

Notices

Stainless -20 fitting wrench size

Old 09-02-2020, 11:59 AM
  #1  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,144
Received 88 Likes on 52 Posts
Default Stainless -20 fitting wrench size

What size is a stainless -20 fitting. A -20 wrench doesnít fit it and I donít have the fitting in front of me and want to order one. Thanks
flat rate is offline  
Old 09-02-2020, 01:07 PM
  #2  
Registered
iTrader: (1)
 
Join Date: Apr 2014
Posts: 2,103
Received 103 Likes on 67 Posts
Default

try one of these from Jeg's
https://www.jegs.com/i/Allstar-Perfo...11153/10002/-1
GLENAMY 242SS is offline  
Old 09-02-2020, 01:13 PM
  #3  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,144
Received 88 Likes on 52 Posts
Default

Originally Posted by GLENAMY 242SS View Post
I saw those but they all only go to -20 I need bigger than that.
flat rate is offline  
Old 09-02-2020, 01:16 PM
  #4  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 8,715
Received 1,411 Likes on 656 Posts
Default

what brand is the fitting, my -20 wrench fits the -20 fitting
F-2 Speedy is online now  
Old 09-02-2020, 01:40 PM
  #5  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,144
Received 88 Likes on 52 Posts
Default

Originally Posted by F-2 Speedy View Post
what brand is the fitting, my -20 wrench fits the -20 fitting
not sure itís the hose from the pickup to the strainer on a 1350 skater. Itís a -20 hose with a thick stainless hose end.
flat rate is offline  
Old 09-02-2020, 01:44 PM
  #6  
Registered
iTrader: (3)
 
Join Date: Apr 2005
Location: Lees Summit ~ LOTO 10MM
Posts: 2,943
Received 84 Likes on 42 Posts
Default


Heres one....
endeavor1 is offline  
The following 3 users liked this post by endeavor1:
CaRoCoN (09-03-2020), SB (09-02-2020), sonicss42 (09-02-2020)
Old 09-02-2020, 01:54 PM
  #7  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,144
Received 88 Likes on 52 Posts
Default

Originally Posted by endeavor1 View Post

Heres one....
thatís funny !
we used smooth jaw knipex to get it off. They make a lot of sizes. I want the smallest ones that get the job done to give more access in the bilge.
flat rate is offline  
Old 09-02-2020, 02:40 PM
  #8  
Registered
iTrader: (1)
 
Join Date: Apr 2014
Posts: 2,103
Received 103 Likes on 67 Posts
Default

My stainless guy measured a -20 and came up with
42.7 mm
1.683 in
GLENAMY 242SS is offline  
Old 09-02-2020, 03:00 PM
  #9  
Platinum Member
Platinum Member
Thread Starter
iTrader: (3)
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,144
Received 88 Likes on 52 Posts
Default

Originally Posted by GLENAMY 242SS View Post
My stainless guy measured a -20 and came up with
42.7 mm
1.683 in
thank you for checking.
these are 2 inch I was just told
flat rate is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.