Need 2 of these step pads for gunnel

Reply Subscribe

Thread Tools

12-19-2020 | 10:06 PM

#11

lucky strike

Thread Starter

Registered

Joined: Sep 2003

Posts: 8,962

Likes: 486

From: Pompano Beach, Florida

Quote:

Originally Posted by Andrew56

Like someone said before those would not be hard to 3D print. Likely printed in red ABS with some yellow inserts also made of ABS. I'd be happy to print a set of them for you. I have multiple printers and have done similar items for boats and cars.

Thats Great!..... I need to match my boat colors
Let me know how much... I'll be happy to pay you for them.
This is my new interior colors

12-19-2020 | 11:37 PM

#12

Andrew56

Registered

Joined: Apr 2019

Posts: 112

Likes: 55

From: Michigan

Between the design time and cost to print the parts I was thinking $120-$150. Does this price work for you? I should be able to match the colors pretty closely, I have a 42 Tiger that has some of the same red in its interior. The yellow shouldn't be too hard either. I'm assuming you are going to want to stick to the red/yellow color scheme, but I could also do something similar to the gray and blue seasick you have in place. I sent you a PM for further questions. Thanks for the interest in 3D printed the parts.

12-20-2020 | 11:31 AM

#13

lucky strike

Thread Starter

Registered

Joined: Sep 2003

Posts: 8,962

Likes: 486

From: Pompano Beach, Florida

Got to get some measurements Andrew.......
Were in Pompano Beach FL..
How long do you figure to make?

12-20-2020 | 12:33 PM

#14

Andrew56

Registered

Joined: Apr 2019

Posts: 112

Likes: 55

From: Michigan

Quote:

Originally Posted by lucky strike

Got to get some measurements Andrew.......
Were in Pompano Beach FL..
How long do you figure to make?

Sounds good. It should be no more then 3 weeks. I will be back home in 2 weeks and it will take roughly one more to finish the design and get them printed.