Winch Strap.
What does everyone recommend for a winch strap. Mine is all sun faded and looks as if it is deteriorating. Not a big boat, 29 Velocity with a single but prefer a little overkill. There used to be someone one on OSO that would make them but I couldn't locate him.
Thanks, Padraig |
On the boats I've had, it's pretty much been just the standard 2" wide X 20', 5,000 pound strength strap. Dual-drive on the winch is preferable but not required. I believe you can get a variety of gear reduction ratios to make it as easy as possible to winch up.
|
Hoping for something better then the West Marine standard strap. Don't need a winch just new strap
Thanks Padraig |
I used to make them but don’t anymore. Looks like Amazon has several to choose from and some made in the USA. Most have a 10,000 breaking strength which is stronger than your winch.
Most local “rigging” shops can make you a winch strap also if you’re not an Amazon fan. |
Cut the hook off it and reverse the strap on the winch. Retie the hook on with a Bowline. I am always more afraid of the hook failing and biting me in a stressed winching situation.
|
I ordered my winch strap from the the below place. I got a 10K winch strap, 2" X 20' from them and they will make them in a variety of colors for you. It's model 1807. Custom length to your needs.
https://customtiedowns.com/product2....list=1&store=1 |
Look on the winch and it will tell you a working load. Then go to somewhere like etrailer and try to match the working load.
I just bought one a week or so ago from there. |
Originally Posted by shunter2005
(Post 4795517)
I ordered my winch strap from the the below place. I got a 10K winch strap, 2" X 20' from them and they will make them in a variety of colors for you. It's model 1807. Custom length to your needs.
https://customtiedowns.com/product2....list=1&store=1 https://customtiedowns.com/tie-downs...-winch-straps/ |
Originally Posted by offshoredrillin
(Post 4795523)
this who i went with as well, i got 4 inch. the Tiger is about 12k with fuel, i cant find any 3 inch for transom though...
https://customtiedowns.com/tie-downs...-winch-straps/ I use Rodsaver 10k rated with loop and hook. They're typically around $25. |
Originally Posted by Tractionless
(Post 4795559)
What do you do for a hook though?
I use Rodsaver 10k rated with loop and hook. They're typically around $25. |
All times are GMT -5. The time now is 08:34 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.