Latham Marine.
#1
Latham Marine.
No luck getting response calling or email (I`m trying to give you money but okay)
Who else is dealer ? I need pricing and dimensions on clevis ends... seems to be top secret, maybe I can get the FBI to do a raid to get paperwork and pricing ??
Teague, CP, Diamond, etc etc nothing
Who else is dealer ? I need pricing and dimensions on clevis ends... seems to be top secret, maybe I can get the FBI to do a raid to get paperwork and pricing ??
Teague, CP, Diamond, etc etc nothing
Top Answer
09-16-2022, 05:36 PM
I never understood that reasoning either.......i had a furnace blower go out in the middle of winter about 3yrs ago. Call the number on the furnace (it was there when we bought the house) and the dude comes out and gives me a price of something stupid like $800 to replace the motor. It had to be a "Carrier" item, nothing else fits he says....my red flags go up when i hear things like that cause he knows we are in a bind. I tell him ill think about it and give him the $50 service call.
Tell the wife to break out the electric heater and stick it in the basement so heat rises and im taking the day off! I rip that furnace open, get the motor out...look at the frame size and hit the Grainger website....20min later i have the same multi-speed motor with same shaft length and bonus it draws less amps so more efficient! And its only $75!!! Call them up and its not at the store by near my house but they do have it a little bit farther north....hit the highway back home in under an hour. Slap the "Dayton" motor into a carrier furnace and she's been purring ever since.
Mixing parts i believe would automatically absolve the maker cause its easy for them to say "well it wasn't used with our original parts"
If i somehow got a set of Dodge brake calipers to fit on my chevy truck and then had a brake failure who can you sue? No one cause neither was designed to have those parts used together. Im sure Larry the lawyer will try but i doubt anyone will get anywhere with it...
Tell the wife to break out the electric heater and stick it in the basement so heat rises and im taking the day off! I rip that furnace open, get the motor out...look at the frame size and hit the Grainger website....20min later i have the same multi-speed motor with same shaft length and bonus it draws less amps so more efficient! And its only $75!!! Call them up and its not at the store by near my house but they do have it a little bit farther north....hit the highway back home in under an hour. Slap the "Dayton" motor into a carrier furnace and she's been purring ever since.
Mixing parts i believe would automatically absolve the maker cause its easy for them to say "well it wasn't used with our original parts"
If i somehow got a set of Dodge brake calipers to fit on my chevy truck and then had a brake failure who can you sue? No one cause neither was designed to have those parts used together. Im sure Larry the lawyer will try but i doubt anyone will get anywhere with it...
Latham been around 50 years so they must be great ?? Biden been a senator for just as about as much... better not talk about the terrible job he`s doing cause after 50 years he`s got his $hit together and he must be awesome at his job right!??!
#3
Platinum Member
Platinum Member
Wow.. I've always had really good luck with Latham on anything I've needed.
#4
VIP Member
VIP Member
It's that way everywhere...crazy.
__________________
Baja 252 Islander
Baja 252 Islander
#6
They ask me for pics so they know what clevis to sell me and then use it against me, then try to sell me a $3600 tie bar. Yeah hard pass. Not paying you triple of what it cost to make one.
I`m not reusing any of the short tie bar components .. just need 2 stupid clevis ends that are 1.5" thick and have a 3/4 hole, is that really that hard ???
Unbelievable these A$$HOLES.
I hate Latham.
Good luck to anyone who has to deal with these morons.
I`m not reusing any of the short tie bar components .. just need 2 stupid clevis ends that are 1.5" thick and have a 3/4 hole, is that really that hard ???
Unbelievable these A$$HOLES.
I hate Latham.
Good luck to anyone who has to deal with these morons.
The following users liked this post:
SB (09-15-2022)
The following 2 users liked this post by Team Archer:
MrMandinga (09-15-2022), Padraig (09-15-2022)
#8
Registered
They ask me for pics so they know what clevis to sell me and then use it against me, then try to sell me a $3600 tie bar. Yeah hard pass. Not paying you triple of what it cost to make one.
I`m not reusing any of the short tie bar components .. just need 2 stupid clevis ends that are 1.5" thick and have a 3/4 hole, is that really that hard ???
Unbelievable these A$$HOLES.
I hate Latham.
Good luck to anyone who has to deal with these morons.
I`m not reusing any of the short tie bar components .. just need 2 stupid clevis ends that are 1.5" thick and have a 3/4 hole, is that really that hard ???
Unbelievable these A$$HOLES.
I hate Latham.
Good luck to anyone who has to deal with these morons.
Send me a PM. Send me the parts, cover the cost of materials and shipping, and I'll make them for you. Seriously.
Thanks. Brad.
(937)545-8991
Last edited by Brad Christy; 09-15-2022 at 03:00 PM.
#10
Registered
It is, indeed. I've been making widgets and wonders for almost thirty years and been in my own shop for closing on ten.
I don't want to make a habit of doing pro bono work, but Dan seems to be in a bit of a pickle, and he seems like a guy I could hang out with (I like his sometimes snotty-ass attitude), so I thought I'd throw him a bone.
Thanks. Brad.
(937)545-8991