|
Trying to get the right yr if that makes a difference, im a GM guy but knowledge of marine engines is minimal,
|
Originally Posted by Alzilla
(Post 4857924)
Trying to get the right yr if that makes a difference, im a GM guy but knowledge of marine engines is minimal,
Pictures would help confirm. |
See if you can see the stamping on the front left pad of the block on the machined area, the block casting date will be on the other side from the casting #
https://cimg7.ibsrv.net/gimg/www.off...83b1b5ceeb.jpg |
Originally Posted by Alzilla
(Post 4857921)
the other number is a plate that is from Mercury,
|
|
Originally Posted by DrFeelgood
(Post 4857925)
It's probably a 96-99 Vortec L31 based setup. Roller cam. I don't think the Vortec L31 went through any real changes through its production run.
Pictures would help confirm. |
Originally Posted by Alzilla
(Post 4857954)
i added 10
|
Pics
Apparently i need x amount of post before i can add the pictures i took, i know itll help everyone help me understand what im doing.
Originally Posted by Alzilla
(Post 4857741)
Good morning
Thank you for letting me join, i am looking for information on my block number #F774641 so i make sure i order the correct parts as i rebuild this engine, but i cant find anything al |
Originally Posted by Alzilla
(Post 4858231)
Apparently i need x amount of post before i can add the pictures i took, i know itll help everyone help me understand what im doing.
Just post make ten posts in some random dead thread. Easy peasy. Thanks. Brad. (937)545-8991 |
You are on post 7 so just add three more posts to this thread. Most people will just count them down. Post 8, then 9, then 10, then pics! :coolcowboy:
|
| All times are GMT -5. The time now is 05:41 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.