Big thank you to ck performance marine & t&d custom painting
#1
VIP Member
VIP Member
Thread Starter
Big thank you to ck performance marine & t&d custom painting
Purchased a 2015 GTS Cigarette end of season of 2020. The boat has triple 400r with the Joystick controls and has had a gremlin for the past two seasons. It would have faulty actuators after short time of use and had everyone stumped. Replace the actuators and short time they burn up. Mike Holford and the crew at CK were able to figure out that two wires were crossed and correct the issue. It did not show up on computer and the Mercury assist line were not of help. Ran the boat last weekend and she's running perfectly, Stern guy is becoming a outboard guy!
West side of Michigan has another great shop that did some work for me, T&D Custom Painting- Dave and crew. Did some touch ups for me on the GTS last winter, work was spot on.
THANKS GUYS
West side of Michigan has another great shop that did some work for me, T&D Custom Painting- Dave and crew. Did some touch ups for me on the GTS last winter, work was spot on.
THANKS GUYS
The following 5 users liked this post by Drake22.250:
bulletbob (09-06-2023), jbraun2828 (09-07-2023), Slippery (09-07-2023), sonicss42 (09-07-2023), TomZ (09-07-2023)
#2
Registered
Greg,
after having both, I can really appreciate each and they both have merits...Truly understanding the value of them is paramount along with being objective...you get it. Also with new school vs d school..technology and all. That's why I resto mod all my boats...
after having both, I can really appreciate each and they both have merits...Truly understanding the value of them is paramount along with being objective...you get it. Also with new school vs d school..technology and all. That's why I resto mod all my boats...
The following 4 users liked this post by Cary 29:
The following 6 users liked this post by Cary 29:
Drake22.250 (09-06-2023), J-Bonz (09-08-2023), Lute Dickey (09-07-2023), Slippery (09-07-2023), sonicss42 (09-07-2023), TomZ (09-07-2023)
#5
VIP Member
VIP Member
Thread Starter
Cary- boat looks great. I try to tackle all I can on my projects too. Hard to find shops that accomplish what they say they will do and communicate with you during the process. What is your next project?
#7
VIP Member
VIP Member
Thread Starter
Magnum is at a stand still, waiting on help with vacuum bagging the bottom then gel coat. Took on a renovation project for shop and it’s taking a lot of my time lately. Three weeks till bow season starts and that’s my true passion, Magnum will probably be slow till mid November.