Offshoreonly.com - 5 minute 4hp+ per ci marine engine dyno pull

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - 5 minute 4hp+ per ci marine engine dyno pull (https://www.offshoreonly.com/forums/general-boating-discussion/380953-5-minute-4hp-per-ci-marine-engine-dyno-pull.html)

ICDEDPPL

11-02-2023 08:16 PM

Piston oilers
Thicker piston domes
Orings
Knife cut billet crank
Dry sump
Aerator

Whenever I asked any engine builder about O rings I always get a weird look and a no . Hmmm.

flat rate

11-05-2023 07:59 AM

Quote:

Originally Posted by F-2 Speedy (Post 4884003)

wast of money, those aren't Pro stock engines.........:D

when I saw the big cams out of Supercat engines at very well know Michigan engine builders dhop he told me that they see the rear cylinders retarded a couple degrees from a std cam actually twisting under load. They make more power with the larger cam.

All times are GMT -5. The time now is 12:24 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page