First 44-Foot Statement Center Console On The Water
#1
Thread Starter
Correspondent


Joined: Jun 2007
Posts: 11,642
Likes: 4,267
Simply beautiful, https://www.speedonthewater.com/firs...-on-the-water/
#4
Registered

Joined: Jan 2007
Posts: 6,474
Likes: 358
From: Mansfield, TX
Oh come on, the "cigarette" style speed boat with 5 seats and a cabin all look the same too, same for the skater looking boats and the deck boats and on and on.
#5
VIP Member

Joined: Jun 2021
Posts: 3,482
Likes: 2,109
From: SW Ohio
Ehhh.... I can usually tell a MFR from across the lake. I can even usually, at least somewhat, pinpoint the era, just by the graphics. I can't do this with the CCs. Even the CCs built by MFRs that build/built inboard boats that I can recognize.
Thanks. Brad.
#6
Registered

Joined: Jul 2011
Posts: 5,173
Likes: 302
From: Clearwater, FL
Been on plenty of boats in FL with black Alcanta and seadeck and they are fine. Usually the floor will need a hose down when at the island for a bit bit that's all.
This isn't 1990 anymore. .materials and fabric have come a long way.
This isn't 1990 anymore. .materials and fabric have come a long way.
#7
Registered

Joined: Jul 2011
Posts: 5,173
Likes: 302
From: Clearwater, FL
Texoma,
Ehhh.... I can usually tell a MFR from across the lake. I can even usually, at least somewhat, pinpoint the era, just by the graphics. I can't do this with the CCs. Even the CCs built by MFRs that build/built inboard boats that I can recognize.
Thanks. Brad.
Ehhh.... I can usually tell a MFR from across the lake. I can even usually, at least somewhat, pinpoint the era, just by the graphics. I can't do this with the CCs. Even the CCs built by MFRs that build/built inboard boats that I can recognize.
Thanks. Brad.
And many of us that enjoy those CC's can do the same, they don't at all blend together and all have defining lines and areas but the old school people and thinkers need something to grasp to and hate on so i guess we found it
#8
Registered

Joined: Nov 2003
Posts: 1,107
Likes: 685
no its more like we could tell a skater from a mti or nortec or mystic they were easy to identify , now fountain cc,s seem to have lost their beak that was a trademark of fountain its kinda like the 4 door suvs today they all look very alike
#9
Registered

Joined: Mar 2008
Posts: 58
Likes: 19
From: Champaign, IL and Osage Beach, MO
Thats what we did this last weekend. Took out the hose and sprayed the floor when we anchored. Works well and takes 10 seconds.
#10
VIP Member

Joined: Jun 2021
Posts: 3,482
Likes: 2,109
From: SW Ohio
Yup. It was easy. From a three hundred yards away... "It's a fountain", or "It's a Baja. With the CCs, it's "It's an outboard center console of some sort....." You gotta get close enough to read the logo.
Thanks. Brad.


