|
Originally Posted by TeamSaris
(Post 4908385)
Once you're in the family....well you know the rest!
Thanks for trusting us with a member of your family. See you soon. Don't forget to grab a t shirt and a hat! Padraig |
Padraig |
Trailer has been readied and looked over, including wheel bearings. Took the VR 1 off the lift, went for a run and then put it on trailer. All set for the 6 hour drive to Saris Racing on Monday. Already looking forward to spring and new motor!
Padraig |
Left the VR 1 at Performance Marine. Met, in person, Johnny and Jason Saris. Great guys. I feel very comfortable, leaving the VR 1 with them.
Joined the team. , 😁. https://cimg6.ibsrv.net/gimg/www.off...02c4da59db.jpg |
I saw the boat yesterday heading up the northway towards Lake George. Looks sharp
You made a good call bringing it up to Saris. It’s in great hands now! |
Engine is coming out this week. Loves me a VR1!
|
Question, do you always want to pull the motors or can someone just bring you a set.
|
Originally Posted by Wildman_grafix
(Post 4910405)
Question, do you always want to pull the motors or can someone just bring you a set.
If its a custom build we do prefer to be involved in the install or at least inspect the customer's install before the first ride. Generally, because we do have our own ramp, docks and full service marina, its just easier for us to do the install and initial water test. That being said we dyno literally everything we do from stock valve jobs to full custom builds, so we do have a lot of confidence in our engines being drop in ready. |
Originally Posted by TeamSaris
(Post 4910409)
Either is fine.
If its a custom build we do prefer to be involved in the install or at least inspect the customer's install before the first ride. Generally, because we do have our own ramp, docks and full service marina, its just easier for us to do the install and initial water test. That being said we dyno literally everything we do from stock valve jobs to full custom builds, so we do have a lot of confidence in our engines being drop in ready. On the dyno runs I think you had before said you dyno in full marine trim and not the "hero" trim a lot of shops do correct? You know, PM me answers, no reason to take up the OP thread. |
How much work did Eddie do to the motor ? What engine was it?
That engine lasted from 2013 till now? |
| All times are GMT -5. The time now is 03:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.