Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Injector cleaning (https://www.offshoreonly.com/forums/general-boating-discussion/384837-injector-cleaning.html)

Brad Christy 02-26-2025 11:17 AM


Originally Posted by F-2 Speedy (Post 4920976)
Why did you delete Dan and my posts in that thread ?? reason scammers......dont think so only the truth

F2,

Saw that. Was wondering....

Thanks. Brad.

Brad Christy 02-26-2025 11:37 AM


Originally Posted by TexomaPowerboater (Post 4920973)
Is there really that much too it that you have to find someone special to do it? Can't you just trailer the boat up to the local lube shop for a fuel injector service?

TexomaPowerboater,

https://cimg0.ibsrv.net/gimg/www.off...8ebc6278f.jpeg

A bad injector didn’t do this, but it’s definitely on the menu with one. Gonna wanna be sure they’re in good shape.

Thanks. Brad.

F-2 Speedy 02-26-2025 09:24 PM


Originally Posted by Sydwayz (Post 4920851)

Why did you delete Dan and my posts in that thread ?? reason scammers......dont think so only the truth

Still waiting for an answer




TexomaPowerboater 02-27-2025 09:02 AM


Originally Posted by Pnb (Post 4920975)
what exactly does your local lube shop do when you ask them for a fuel injector service?

They hook them up to the same machines the dealerships use. I haven't done it, but am considering it.
What exactly do these referral's do that is so ground breaking?

F-2 Speedy 02-27-2025 09:16 AM

Why dont you call Smitty and get your answer first hand

TeamSaris 02-27-2025 10:07 AM

If you're in PA and want to stay semi local, marren fuel injection does fantastic work.
They come back clean and with a complete data sheet including off times etc.
Your local lube shop will not give you that. from their website- Your fuel injectors are the best place to find new power for your motor!

Getting Your Injectors Balanced & Blueprinted

Here is what we do:
  • Get a base line reading on them as they came out of the engine.
  • Information is downloaded into a computer (flow rates are in CC per minute).
  • Check spray pattern and reverse flow to check for contaminants.
  • Strip down the injector.
  • As it is being ultrasonically cleaned, the injector is opened and closed at a desired pulse width with a programmable fuel management system.
  • Injector is checked for any remaining cleaner.
  • Injector is brought up to a certain temperature and checked with a strobe to see the fuel atomization.
  • Electrical windings in the injector are checked with an oscilloscope and an ohms test performed.
  • Three hydraulic tests are performed before and after cleaning.
  • Perform a Leak Down Test
  • Install new pintle caps, o-rings and in-line filters
  • Supplied with a Computer Analysis Sheet
Once the process is complete, the key is for all the injectors to be within 0-2% deviation of one another. They should not exceed a 4% range between one another. The process improves:
  • Flow which is critical under high rpm in relation to horsepower
  • Fuel Atomization which contributes to the torque rise in the motor



www.injector.com



Ryanw10 02-27-2025 11:17 AM


Originally Posted by TexomaPowerboater (Post 4921037)
They hook them up to the same machines the dealerships use. I haven't done it, but am considering it.
What exactly do these referral's do that is so ground breaking?

No way I would trust a local lube shop to pull injectors out of my boat.

PA.WOODCHUCK 02-28-2025 04:53 PM

Related

Who's the go-to places for PCM/ECM issues, especially 496 555

F-2 Speedy 02-28-2025 06:55 PM

Mark Boos or Dustin Whipple...........^^^^^

SB 03-01-2025 05:01 AM


Originally Posted by TexomaPowerboater (Post 4921037)
They hook them up to the same machines the dealerships use. I haven't done it, but am considering it.
What exactly do these referral's do that is so ground breaking?

Lots of people cooking in restaurants out there too. They all have ovens/stoves.

So, yeh, what difference does it make. Sarcasm :)

So,,,,no. Many different injector machines out there and some much more capable and precise than others. Then, you have the operator and operators knowledge base and experience.



All times are GMT -5. The time now is 09:38 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.