Ciggy lost in indy
#6
Registered

Joined: Dec 2013
Posts: 1,015
Likes: 455
From: Bourbonnais, IL
Holy notched transom! I’ve never seen the notch go the entire width of the boat and also completely encase 380 tabs. I guess you have to with that many props lined up, I’ve just never seen it. Thanks for sharing.
#7
Registered

Joined: Jan 2006
Posts: 3,859
Likes: 791
From: St. Pete Beach, FL
My boat has floor scuppers and the floor is above the waterline. So if fish boxes and deck hatches have the rubber perimeter gasket in tact, most water coming over the gunnels on to the deck should drain with out relying on the bilge pumps.
It’s one limitation of my hull that was modified in later years, more flotation under the integrated transom bracket to help float 660lbs verados vs 500lbs 2 strokes it was originally designed for.
Last edited by hogie roll; 03-23-2025 at 07:40 AM.
#8
That’s not a top fish it looks to be a 41 GTR or GTS.
and it’s not technically a notched transom, it’s the bracket for the motors that runs as a vee to be esthetically pleasing and match the hull lines (and like hogie said a lot beacier that way). Look down at the hull, it has no notch and no pad.
and it’s not technically a notched transom, it’s the bracket for the motors that runs as a vee to be esthetically pleasing and match the hull lines (and like hogie said a lot beacier that way). Look down at the hull, it has no notch and no pad.
Last edited by thisistank; 03-23-2025 at 11:43 AM.





