What’s everyone working on?
#16
Registered


Joined: Oct 2005
Posts: 243
Likes: 132
From: texas
All the end of season services
I have boxes of stuff staged and ready
As soon as cast comes off foot.
New steering box, and cable, with rudder indicator
Pull out drives and lube joints, chsnge gear oil
Replace a missing shift cable bellows x 2
At outdrive end
spark plugs, oil, filters etc
One new battery,
Additional bilge pump for the aft end of bilge .
for some reason the engine bay bilge is in the fwd bilge, vice aft were water collects. So by the time it comes on, there is many gallons of water sloshing around. New blower
clean and seal teak swim platform
pull out board exhaust riser and inspect possible leak or ?
I have boxes of stuff staged and ready
As soon as cast comes off foot.
New steering box, and cable, with rudder indicator
Pull out drives and lube joints, chsnge gear oil
Replace a missing shift cable bellows x 2
At outdrive end
spark plugs, oil, filters etc
One new battery,
Additional bilge pump for the aft end of bilge .
for some reason the engine bay bilge is in the fwd bilge, vice aft were water collects. So by the time it comes on, there is many gallons of water sloshing around. New blower
clean and seal teak swim platform
pull out board exhaust riser and inspect possible leak or ?
#19
Man, I agree here. We just finished up our spare Small- 6x10- bath couple months ago. Started as tile work and ended up going down to studs and floor joists and starting over.
And it rarely gets used lol.


















