![]() |
Can you find these in white?
Can you find any of these gauges or just the bezels in white? Redoing all the gauges to Autometer white marine and want to match somewhat.
Does the bezel of the drive gauge pop off without taking it out? If so I will just paint to match cause that doesnt look fun to take out. Thanks! PS - Off subject but do any of you higher power stereo guys (5k watts+) run a lithium battery just for the subs amp? If so what brand? Looking at Glowe Voltage series 3. |
|
What's your thinking on incorporating a LiFeP04 battery? Adding as a standalone or replacing an existing flooded cell type battery? How are you planning on charging it if standalone? They have pretty rigid charging protocols necessary in order to get a full charge...just curious.
|
Originally Posted by bajaman
(Post 4940995)
What's your thinking on incorporating a LiFeP04 battery? Adding as a standalone or replacing an existing flooded cell type battery? How are you planning on charging it if standalone? They have pretty rigid charging protocols necessary in order to get a full charge...just curious.
|
You could just take them to a powder coater and have them done in white
|
The drive indicator is a complete assembly. The outer rim has studs that bolt it all together Marine Parts Plus Parts Search
I would loosen it enough to get tape behind it and paint it in place |
When I did my dash and had panels made I had them make a new card for the trim gauges
|
|
|
|
| All times are GMT -5. The time now is 09:20 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.