Needle in a haystack
02-08-2026 | 02:48 PM
#31
Registered
Joined: Dec 2013
Posts: 517
Likes: 129
From: houston texas
sry dont
not much into videos and posting on medias,,,,just do lots of custom restos and enjoy them
then do another when dialed in to my expectatioins
here is pic of how high she floats as was 1 of mikes last builds trying lighter layup before went to OL
full foam core build on deck,floor,birth boxing ect so was approx 650-700lbs lighter laup than a full pleasure
then take off another 1500-2k with the o/b conversion over the i/o
and the 32 was only 7' wide with the 24deg bottom so for a narrowwave crusher she floats nicely high
as why snagged it when was available
and the 1 pic bud took running ,,,
rides high on strake and back 1/3 of hull in calm
running 15x34 x 20 rake cleavers surfaced,,,,,the 20s give lots of full hull lift
as run in 1-4s in bays and gulf to be on topwater
not much into videos and posting on medias,,,,just do lots of custom restos and enjoy them
then do another when dialed in to my expectatioins
here is pic of how high she floats as was 1 of mikes last builds trying lighter layup before went to OL
full foam core build on deck,floor,birth boxing ect so was approx 650-700lbs lighter laup than a full pleasure
then take off another 1500-2k with the o/b conversion over the i/o
and the 32 was only 7' wide with the 24deg bottom so for a narrowwave crusher she floats nicely high
as why snagged it when was available
and the 1 pic bud took running ,,,
rides high on strake and back 1/3 of hull in calm
running 15x34 x 20 rake cleavers surfaced,,,,,the 20s give lots of full hull lift
as run in 1-4s in bays and gulf to be on topwater
Last edited by johnmiffco; 02-08-2026 at 04:08 PM.
