After..

Cig, I think that looks great !!! That's about the size i'm installing. Nice looking Cig. Wardey

If you don't absolutely need the scoops for clearance, then you could design your scoops and pad cushions so that they are removable. For all the reasons mentioned above I usually leave my scoops off the boat. But I can remove two of the pad cushions and bolt on the scoops in about 5 minutes. This pleases the family, but allows for the proper "look" at poker run or fun run appearances.

Cignificant
Are those Harwood if so do you know what number thanks

They're not Harwoods. Here's the whole story..

http://www.offshoreonly.com/forums/s...ighlight=scoop

Try this site for Scoops.
www.up22.com

Hyper -
With the 454 in the baja - me and the girlfriend - just bored on a beutiful Sunday- ran from Toledo to detroit just to have a pizza in greektown
(at Papillo's!!!!) anyone from this area should know the place....
we got there - tied up - took the people mover - had dinner - filled the tank back up - ran back to toledo.

add it up - that pizza cost me $200.00!!!

$75 to get there (fuel)
$25 for "beverages"and ice
$75 fuel to get back
$25 at Papillo's.

However, - one of the best pizza's (or should I really say one of the best days!!) of my life.

I'd like to do that again - and not have to spend as much.

Hence, - the new project.

quiet storm,
i got mine from summit racing, i used the 3163,
but if i had to do it over again i would do the
4163, it is a bolt on type, the 3163, is a bond
on type, for the amount of work required the
$ 30 bucks more for the bolt on is worth it,
i believe the cost are $163 for the bond on,
and $193 for the bolt on.
hope this helps
jt