Repitch a prop, How hard?
01-31-2003 | 09:36 AM
#12
AT Cult Member #3
Joined: Oct 2000
Posts: 20,711
Likes: 17
From: Pa.
Originally posted by bouyhunter
I re-pitched one myself.
900 rpm and shallow water - it didn't go very well, musta been a refrigerator or a bus on the bottom, so I don't recommend it.
it was a 21pitch 3 blade cleaver.
I took it to the prop shop for the guy to look at it - he stared at it for 5 minutes straight and told me there was no way it would ever be a prop again.
I think I got $10 for it at the metal recycler.
I re-pitched one myself.
900 rpm and shallow water - it didn't go very well, musta been a refrigerator or a bus on the bottom, so I don't recommend it.
it was a 21pitch 3 blade cleaver.
I took it to the prop shop for the guy to look at it - he stared at it for 5 minutes straight and told me there was no way it would ever be a prop again.
I think I got $10 for it at the metal recycler.
They make excellent paperweights!!
02-04-2003 | 04:32 AM
#13
Registered
Joined: Jul 2002
Posts: 1,387
Likes: 0
From: Houston,texas
REPITCHING STAINLESS
Originally posted by 105mph_38_2003
I agree Ron
, Just call Darin at Houston Prop, he does most the guys on the board and superb work. I think his # is (281)580-PROP. I drive down Kuykendahl 2 times a day and see his sign. Call him pay the $225 or whatever and in the long run you will be much better off....Just my .02
I agree Ron
, Just call Darin at Houston Prop, he does most the guys on the board and superb work. I think his # is (281)580-PROP. I drive down Kuykendahl 2 times a day and see his sign. Call him pay the $225 or whatever and in the long run you will be much better off....Just my .02
ThankYOU! VERY MUCH. DARIN
Last edited by HOUSTONPROP; 02-04-2003 at 04:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Scarab P-29
General Boating Discussion
14
08-25-2002 11:50 AM
