Offshoreonly.com - Need New Spark Plug Wires...suggestions?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Need New Spark Plug Wires...suggestions? (https://www.offshoreonly.com/forums/general-boating-discussion/39662-need-new-spark-plug-wires-suggestions.html)

Flyinbrian

12-27-2002 07:48 AM

MSD's or Taylor's.

I used to use Accel 8.8's. Then I took an Ohm meter to them and other wires to see which had the least resistance. MSD 8.5's had the least, so that's what I use now. Accel plugs, caps, and rotors are junk.

bobby daniels

12-27-2002 11:00 AM

THE ACCELS HAVE A GOOD WIRE IN SOME BUT THE INSULATOR IS JUNK ,TAYLOR STAYS ON OUR DYNO MOTOR AFTER MOTOR WITH
NO HEAT DAMAGE
MY 2 CENTS WORTH

bobby daniels

12-29-2002 11:26 AM

SUMMIT HAS THE BEST PRICES ON TAYLOR

Tinkerer

12-29-2002 09:38 PM

TAYLOR WIRES are the only ones to buy. I have used them for many years and have never had one go bad.

All times are GMT -5. The time now is 06:50 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page