Like Tree0Likes

Whipple 454/502 special pricing

Reply
Old 01-02-2003, 03:58 PM
  #1
Registered
Thread Starter
 
Whipple Charged's Avatar
 
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
My Boats: Engine, speed, powerboats, Outerlimits SV43 with Whipple 1375SCI's
Posts: 1,436
Default Whipple 454/502 special pricing

Hey everybody, I wanted to offer a couple of systems at special pricing to move, for 93-2002 454 330HP, 385HP, 415HP MPI engines. We have a couple left in stock and were switching over to the top mounted systems, so pricing for these are $4000+ shipping. These are complete systems. This is to all customers and dealers, there are no discounts from this pricing. Offer ends 1-10-2003.

Email me with any questions, [email protected].

Thanks,
Dustin Whipple
Whipple Superchargers
Whipple Charged is offline  
Reply With Quote
Old 01-02-2003, 04:11 PM
  #2
Tee
Guest
 
Posts: n/a
Default Hey Dustin!

How about a special on the Whipple 6.8 V-10 system for my tow rig!
 
Reply With Quote
Old 01-02-2003, 04:17 PM
  #3
Moderator
Gold Member
 
ChrisK's Avatar
 
Join Date: Nov 2001
Location: Orlando
My Boats: Boatless... Damn...
Posts: 4,477
Default

So these will not work with the 310HP MPI 454?... Mine is in a '01 24' powerquest...
ChrisK is offline  
Reply With Quote
Old 01-02-2003, 05:17 PM
  #4
Registered
Thread Starter
 
Whipple Charged's Avatar
 
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
My Boats: Engine, speed, powerboats, Outerlimits SV43 with Whipple 1375SCI's
Posts: 1,436
Default

Sorry, just the systems listed, but that V10 needs it !!

The 310 can't be sold without head change or head work, too dangerous.

Thanks,
Dustin
Whipple Charged is offline  
Reply With Quote
Old 01-02-2003, 10:21 PM
  #5
Ric232
Guest
 
Posts: n/a
Default

Dustin, are you not going to produce the side mount systems any longer? I thought the top mounts would only work on MEFI3 motors. Will I be out of luck in the future with my MEFI1?
 
Reply With Quote
Old 01-02-2003, 11:36 PM
  #6
Moderator
Gold Member
 
ChrisK's Avatar
 
Join Date: Nov 2001
Location: Orlando
My Boats: Boatless... Damn...
Posts: 4,477
Default

Damn...
ChrisK is offline  
Reply With Quote
Old 01-03-2003, 02:11 AM
  #7
Registered
Thread Starter
 
Whipple Charged's Avatar
 
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
My Boats: Engine, speed, powerboats, Outerlimits SV43 with Whipple 1375SCI's
Posts: 1,436
Default

ric232,

You just have to upgrade to the MEFI3, pretty simple procedure, have to change some pins around in the harness and plug in the new ECU.

Thanks,
Dustin
Whipple Charged is offline  
Reply With Quote
Old 01-03-2003, 08:37 AM
  #8
Registered
Platinum Member
 
Join Date: Sep 2001
Location: Kingsville----lake erie
My Boats: 97 41' Saber --Ancestral Spirit
Posts: 1,328
Default

Dustin will these work on these motors?? Below is an e-mail I sent through your website on dec 24--- hadn't heard back as yet, will these work or not enought air?

I'm considering purchasing 2 whipple's for my 461cu. marine motors, started as 400 cyclones (454's). Presently they are 9:1 CR, and are producing 475 hp. with a Ultradyne 288-296-114 cam and a 850 Holley, using Imco exhaust. I'm hoping to increase my cruise speed on my 40' scarab (12,500 lbs.) Is there going to be a problem with the compression ratio ? or as long as i keep the boost down to around 4-5 will i be alright? And what kind of hp and torque gains would I be able to expect on this set-up? Thank you, if you need more info on the motors please send me an e-mail.
delsol is offline  
Reply With Quote
Old 01-03-2003, 12:23 PM
  #9
Charter Member#157
Charter Member
 
MnFastBoat's Avatar
 
Join Date: Oct 2000
Location: Minneapolis, Mn, Usa
My Boats: 1999 Advantage 28' Cat
Posts: 1,847
Default

how much are teh top mounted ones for a 1999 502 mpi??
The old style, side mount will not fit on my starboard motor without putting it through the side
Found this out hte hard way
__________________
This Cat is trying to keep up with the Big Dogs
MnFastBoat is offline  
Reply With Quote
Old 01-03-2003, 03:56 PM
  #10
Registered
Thread Starter
 
Whipple Charged's Avatar
 
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
My Boats: Engine, speed, powerboats, Outerlimits SV43 with Whipple 1375SCI's
Posts: 1,436
Default

del sol,

These are for the MPI motors only, will not fit on your carb engines.

To answer your email (were closed doing inventory until next monday), you can expect approx. 675 hp through your engine. Not sure what your torque is now, but you should be up near or above 700lbs. I would not exceed 5lbs. of intercooled boost and I would retard your total timing curve to 30 max, preferably 28 total. Jetting is key, gotta get the jetting close or you'll detonate like crazy. You should see a large gain in cruising speed on a boat that size because torque will dramatically increase. The system I recommend for this engine is our 3.3L with the standard intercooler, $5395, black finish, comes with cross over, thermostat housing, intake, cooler, carb adapter, belt system, etc. email me directly for the winter OSO discount

mnfastboat, the new system is $6695 each, if you have MEFI 1, then you have to buy a MEFI 3. Email me and I'll quote you for everything you need, I'll give you the OSO discount

Thanks,
Dustin
Whipple Charged is offline  
Reply With Quote
Reply

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smitty
General Boating Discussion
0
03-14-2006 11:02 AM
800XCR
General Q & A
0
02-17-2005 10:19 AM
PowerboatsNW
General Q & A
4
10-16-2004 09:13 AM
eyezlee
General Boating Discussion
1
09-21-2004 12:18 PM
Whipple Charged
General Boating Discussion
1
11-19-2003 09:48 AM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 04:19 PM.


Copyright 2011 OffShoreOnly. All rights reserved.