quad rotors
#24
Registered
Joined: Sep 2001
Posts: 439
Likes: 0
From: Cucamonga
Cigar,
What beautiful motors! Gary is one of the best builders and riggers around. How did you get a picture of him? I don't think he's ever been seen on film before...Are your marine headers polished SS tubes or IMCO's?
What beautiful motors! Gary is one of the best builders and riggers around. How did you get a picture of him? I don't think he's ever been seen on film before...Are your marine headers polished SS tubes or IMCO's?
#29
Originally posted by CIGAR
CORD
That is an external drive oil pump off the cam.
VELOCITY MARK
11lbs
BURTANDNANCY
Thank-you Burt I've seen your boat down at GT. We are going with cmi big tubes
CORD
That is an external drive oil pump off the cam.
VELOCITY MARK
11lbs
BURTANDNANCY
Thank-you Burt I've seen your boat down at GT. We are going with cmi big tubes
#30
Guest
Posts: n/a
VELOCITY MARK
These motors do have intercoolers on them they are recessed into the manifold. We are running 8 to 1. There is a couple of reasons I didn't go with carbs wanted everything to fit under the hatch(can't mess with the sundeck wife would kill me), and I think these will idle better etc.
FISHEY This isn't no fishing boat!!!!!!!!!!!!
These motors do have intercoolers on them they are recessed into the manifold. We are running 8 to 1. There is a couple of reasons I didn't go with carbs wanted everything to fit under the hatch(can't mess with the sundeck wife would kill me), and I think these will idle better etc.
FISHEY This isn't no fishing boat!!!!!!!!!!!!



