Stock flame arrestors
#1
Official OSO boat whore
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Stock flame arrestors
Sorry, to put this in General Discussion, but I felt that it wasn't going to get enough exposure in the parts wanted section.
I'm looking for some stock style carb flame arrestors. Depending on the type I'd be willing to consider oddities. Condition isn't critical, so naturally I'm not willing to pay much. Please e-mail me some pics and dimensions of what you have....
[email protected]
I'm looking for some stock style carb flame arrestors. Depending on the type I'd be willing to consider oddities. Condition isn't critical, so naturally I'm not willing to pay much. Please e-mail me some pics and dimensions of what you have....
[email protected]
#3
Official OSO boat whore
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
My current idea calls for a standard Holley/Rodchester 5-1/4" throat. Something that is stock-the plate style of arrestor. About a 8" diameter. Mercruiser or volvo, it proably wouldn't matter.
Do you have aftermarket used ones?
Do you have aftermarket used ones?
#4
Registered
Join Date: Oct 2000
Location: Sussex, WI
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Cord if your looking for a stock arrester, I think I have one laying around somewhere, came off the carb of 350 mercruiser.
If you want it I'll dig it up and you can have it.
If you want it I'll dig it up and you can have it.