Too old

where do you get that for 139.00. I think that will fit
my mtc jack.

I'll look into it. People charge $$ for SS because they can. I've found to be quite reasonable.

Cord
What I am looking for is something to mount to a jack
and can tilt to help put the drives on and off with. Is what you are looking at just a stand or can it be used
to help with the heavy work?

Here is my homebuilt stand. Next addition is wheels.

2

B1 Drive slips in either direction, and upside down, (for painting lower), and sturdy enough to stand on.

Remember, lifting/lowering the tongue of your trailer will move your transom for correct position when installing/de-installing.

I was just going to build a stand. I've seen the jack ones, but I've never really liked them. I just pick the dang thing up.

Have another attachment that goes into the engine stand, then the outdrive mount slides into it. As that attachment is rotated within the engine stand, the height of the drive chages for different boat heights.
Works great and won't fall over.

Something a buddy of mine made. Sounds like what you are after.

Ok.. here's my idea.