boot

MBam, Sorry I didnt' get to call . I'll try again later. got to run now .

Muffman, I sell truck parts . I haven't come across anything in the exact size I need that they sell for trucks . Good thinking though !

Forest ,got it .

Bruce , Thanks for checking .

Thanks for all the help guys ! I know someone can help me out . Just need the right peice .

Thanks ,JOE

NASTY HABIT

rumaged thru my scrap pile...4" id ,3" od , 2.5 od and on down ....sorry ...I thought my old risers might work ....but nope

Ike

Boot, Give my friend Bob Martin a call, he says he has what you need and he lives in NJ. His # is 1-609-923-0631, Ike.

BruceK

By the way, say hello to Bob Martin for me...
I do have some pipe here, but 1 pipe has an ID of 3 1/4 and the other is 3 1/4. It's basically the same pipe needed for a jacketed 4" exhaust. I have both inner and outer.
Not sure if that will work for you. Let me know.
Bruce

boot

Hi guys ! Sorry I haven't gottin this figured out yet . Many of you have made great offers to me but I have been traveling alot and lost track of this post and to who said what . I have to go to texas this week and when I get back I need to figure this out ASAP ! A coupel people where going to send me pictures of what they had to offer but I never got them . You can e-mail me at [email protected] .

I need 3 1/2" INSIDE diameter pipe . If anyone can help, Thanks ! I will be making contact next week .

thanks , joe

boot

Here's a quesion for you exhaust guys .

If you have a 4" outside diameter ,water jacketed exhaust , What size is the inside diameter of the INSIDE pipe? IS it or can it be 3-1/2" or bigger?

I need to keep a 4" O.D. to fit in my mufflers. but I need the inide as big as I can and still have a water jacket . SO what is the inside size of a standard 4" out side diameter exhaust system with a water jacket ?

Cord

iTrader: (2)

I'm sure that it's no more than 1/4"

Doller Offshore

Hi, try us, I may have it in my " I can't believe I own it" department. I have alot of 3 1/2 inch stuff.


mindi, doller offshore 800-376-1616

Mbam

Boot, typically it is a 3 1/2 OD .065 wall

KAAMA

iTrader: (1)

I know this is a very old thread, but I have tried calling Lake Precision Welding and the phone is disconected. So, does anyone know if they may be operating under a different name or if I can still get ahold of "Bob"---even if he is still working somewhere else? I need some stainless exhaust pipes welded. Any help would be appreciated...thanx.