MERCRUISER to ARNESON conversion question(s)...???
#1
Registered
Thread Starter
Join Date: Aug 2002
Location: east coast/new england
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
MERCRUISER to ARNESON conversion question(s)...???
I have ALWAYS liked the performance & simplicity of the ARNESON/KAAMA drive systems, but I've only had experiences with TWIN/DUAL motor installations...I now see there is a BRAVO to ARNESON conversion kit...Do any of you have ANY experience with a SINGLE ARNESON driven boat???...Does it "torque over"???...Is it "squirrely" at speed???...Does the X-dimension matter???...Anyone got one on a 22' VELOCITY by any chance???...I am well aware of the low-speed/reverse & limited prop selection issues so we don't have to go there...What do you guyz know???...Fill me in...THANX in advance....
#2
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
i believe the x-dim is very important if its not right the surface driev won't be at the surface.
ask rik wimp. he's aorund teh baord evey now and again. If not e-mail him e-mail addy should be on the twindisc/arneson website.
he knows just about everything about ASDs.
ask rik wimp. he's aorund teh baord evey now and again. If not e-mail him e-mail addy should be on the twindisc/arneson website.
he knows just about everything about ASDs.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#3
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
i if GEO is still around OSO ask him about his donzi. I think it was geo withath 18 donzi and teh ASD. runs over 100 with a small block.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!