I almost stained my drawers.....
#24
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
i believe all modenas you can see the engine through the rear deck glass.
sling eth herings worked well. The 30 is fora large shaft and i runa small shaft. BUT i called herrign and they woudl swap it out for a small shaft.
the 29 lefty worked well. I gained 1mph over the mirage BUT at i can only turn it to 4300 rpms. Whereas the mirage i was spinning to 5500. Oeverall i was impresed witethm. And hering said they'll work with me to get to the right pitch.
sling eth herings worked well. The 30 is fora large shaft and i runa small shaft. BUT i called herrign and they woudl swap it out for a small shaft.
the 29 lefty worked well. I gained 1mph over the mirage BUT at i can only turn it to 4300 rpms. Whereas the mirage i was spinning to 5500. Oeverall i was impresed witethm. And hering said they'll work with me to get to the right pitch.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
Thread
Thread Starter
Forum
Replies
Last Post
Chris288
General Q & A
8
08-03-2004 01:11 PM