Hi every one
 

Well was searching the web for info and think I hit the Mack daddy of sites here. I am a manufacture of radio controlled boat hulls and like to stay on the cutting age in style and design. I am sure you guys will be a tremendous help. Great looking site.

Welcome! Unless you pay the membership you aren't getting the whole picture of the site

I think he can still see your Avatar!!!!

were is the best place to get help with my signature

Shop around or ask Too Old for one of his Millions

Welcome!

Do yu manufacture the ones with the weedeater motors or the smaller scale ones with the smaller OS motors?

Mostly gas motor trimmer type but we have gone way beyond the trimmer speeds I am currently doing 64 mph with one of my 49 inch supercats on pump gas

I have one boat that runns 69.9mph and have seen other gas boat do 80 it fun
http://www.offshoremodels.com/videos/Elmira.wmv

That's a great video! Awesome quality.

A squirrel could have a blast on one of those...wish I was a squirrel for 1 ride:D

I want one:D

Those things are great. Here's what you need next:

http://www.conleyprecision.com/products.htm

Nice.... Would love to get one..

Yep, get yourself a membership quick. It'll be the best money you ever spent. Trust us! :)

i have a 41'' by 9'' fountain model, currently rigging with a weedeater motor, it has the beak and all. im going to paint it just like my 35 lightning.

hell thats right up the road from me Im in Vestal NY

Offshore, do you have a site? Interested!!!!:cool:

do you manuf. a model 41 apache?

2

what is your phone #

we do a 57 inch apache www.offshoremodels.com

Lucy my number is 1-900 I LOVE YOU:p :crazy: Say hi to whats his name?oh yeah Mark:cool:

Offshore Models....Which engines do you think would wake my Aero Marine 45" up a bit? Have a 28cc Homelite in it now....Thinking of building up a G23 Zenoh...Pipe, case stuffer, port the case and cylinder, MSD ignition, Short Skirt Piston, mill the head, then run Alcohol? Walbro carb and velocity stack. Sound like fun?

Tommy

tommy, fun or insanity?

Lucy....You gotta see my goped...Pipe, carb, intake manifold, velocity stack, case stuffer, and a few other little goodies. stock piston and crank.....with the biggest drive spindle (basically highest gearset possible) It will throw a 200lb person off the back from a idle-wot start :)

hope to see some of my favorite osoers in miami this winter!!!!!!!!!!!

Lucy....Very pretty....Thanks for telling me where it is located. :eek: :p ;) :D

The new 260s are great. Mod we are getting 6.2 hp

Congrats on finally being able to post offshoremodels. Hope to see you around more :)

Tommy,


You put short skirt, Pipe stuffer and Alcohol in the same sentence and it sure sounds like a party to me.



OH!, you were talking about, remote controlled boats. I thought you were talking about Saturday night.


My mistake.




Over & Out,
Dano

When I first read the name "OffshoreModels" I was thinking of the women that were having their pictures taken on the race boats in Daytona! :crazy:
Welcome aboard! ;)
I have added your Link to my website under Hi-Perf Links. Afterall, you have a hell-of-a site there!
I think you will be getting many orders for boats from the OSO gang....:cool:
My model boat was 13' feet...:D :D :D

I agree. Great site. I hope you get lots of orders from OSO.

I also hope you become a member and support our site.



Good luck to ya,



Over & Out,
Dano

I have a gas boat. We had a shaft designed to mount weedeaters straight out of the box. No alteration cheap disposable power. You can usually find a neighbor getting rid of a weedeater and run it in alcohol or ether until it burns up. right now my boat has an echo 30cc in it, which are great power plants, even the lawn crews use them. I have done tuned pipes in the past and I think I would rather have to motors stock and have big cubic inches. Echo builds all the way up to a 50cc that will fit on my shaft. Here are the pics and movies of my boat.

http://tamug.tamu.edu/~egk9566/rcboat.htm

I will be joining for sure great site. I didn't come over to sell boats but if it goes that way cool, extra bonus. I always like to get advice from the guys running the real deal. I have a few friends that raced years ago and there knowledge has been very helpful in designing the models. I am doing a stepped mono right now and am being told its now a hydro from our sanctioning bodies. Was hoping to get more history on the introduction of stepped monos into real boat racing. I see a need to get the model boat world up to speed with the hull technology that is out there. I see this is going to be a great place to stay on the cutting edge.

Do a cat, that will fly, steps, but still handle waves amazing for its size.

Easier said than done eh? ;)

I hope it is too. You support our site and give good service, we will support you. You just tapped into the best site of the offshore sport.


Welcome and best of luck to ya,



Over & Out,
Dano

Welcome aboard. I assume you are familiar with this site.

http://pub48.ezboard.com/bamericansc...oatassociation

I will add a link on my site to yours and when I get a chance, I will look at your site's links. I might have had a whole page of links for RC boats.

hey i have a question i have a pretty pissed off i think its a 55 in scarab light lay up hauls tail when it runs!!
but it is so stinkin finiky,, i hve pulled on the rope untill i thought my dog gone arm was gonna fall off it wont idle very well,,
when it runs i can spank anyone around here with there hobby shop bought junk with stock zenoahs and whatever they comewith,, but sittn on the dock pullin it looks silly,,:),,,,,,
any advise?
i built a bunch of go peds (back flipper kind) that rip and never had these isues,
this boat is pretty radical i guess got it off ebay some old cogger raced and won everything in texas with it,
turn fins and all kinda stuff,, found on ebay a blast but my arm is tired,
u rebuild the motors and set em up?
lemme know
i cant have the fastest big boat around here so maybe i can afford to have the fastest smallest one.
i guess i have a big ego with little wallet

Email me some pics let me see what you are working with

Very interesting.....
 

Eddy:
I'm the guy from Kansas that you still owe over $2000.00 for a boat that I PAID FOR and you have NEVER delivered!!:mad: :mad:
I have sent you TONS of e-mails in the past, you have my phone numbers, and you have made NO attempt to either refund my money or send me a boat!!!!
I will be posting your e-mails in order to prove that I have paid for a boat from you, as well as the dates of our "Transaction"
My next step will be to contact the Better Business Bureau!
If there are any attorneys on this board in New York, please pm me as I will pay a commission to help recover funds from this guy.

OSO'ers beware. You will not receive your merchandise for your money. Trust me.:mad: :mad:

offshoremodels: If you want to contact me, my number is 620-874-4280, but call only if you will rectify this situatiion this time, no more BS promises!!!!!

Whats up Eddy???