Rick, I remember that other
members of your Team at the
Navy base said you had a screw
lose.
Mike J.

Hey John, you may be awake now but you better lay off the capt and coke and look back in the book i think he is talking about the big nut and washer for the shaft which is 7/16-14 locknut and 7/16 washer. Ike.

R Addiction is on the ball.
Thanks!!!!
I was talking about the bolt and cupped washer that holds the bushing in . There is one one each side. I knew it was a 3/8 by the 9/19 head size but I didn't know the thread count and the lenth.
thanks a lot.

Mike J
I have more than 1 screw loose

Rick

Oh you mean the balljoint /grease boot bolt not the upper a arm bushing.

No the upper A arm bushing bolt and washer. On each side of the a-arm there is a washer that covers the bushing and it also has a lock washer then a 3/8 bolt. well one of the bolts came out. it is a big pain in the $ss to take another bolt out to get the size. I hope i get the correct one. we'll see this weekend

I was thinking of the other style.