Its almost Spring and the board is dead!!
03-12-2004 | 02:14 PM
#33
My EX got the Sleekcraft
Joined: Apr 2002
Posts: 3,016
Likes: 1
From: Apopka, Florida
Gawd..I'm not bored..
-charging 10 sets of batteries-cleaning lenses
-erasing 8 256mb Xd cards
-prepping for:
*races at Ocoee this weekend
* races at Crescent City..next weekend
* vintage boat show at Mt Dora the following weekend
AND===>>
***Really getting excited for OFFSHORE at St Cloud first week of April..
Temps expected to be in mid 70s to 80s till then....
-charging 10 sets of batteries-cleaning lenses
-erasing 8 256mb Xd cards
-prepping for:
*races at Ocoee this weekend
* races at Crescent City..next weekend
* vintage boat show at Mt Dora the following weekend
AND===>>
***Really getting excited for OFFSHORE at St Cloud first week of April..
Temps expected to be in mid 70s to 80s till then....
03-12-2004 | 03:30 PM
#35
Registered
Joined: Nov 2000
Posts: 1,070
Likes: 0
From: charlotte Mi
I have been picking up some odds and ends....need to get a pair of K&N arresstors yet, put one motor back together then wait till it warms up a bit to get busy......Crazy.....try 10psi and see if you can make 700hp.....what could happen!!!!! ....Fred
....Fred
03-12-2004 | 04:37 PM
#37
Registered
Joined: Jan 2001
Posts: 3,140
Likes: 0
From: Holland MI
Fred, I could probably get pretty close to 700 with just some adjustments. It's jetted rich right now and could be leaned for more power but I'm not going to run it with the small pulleys anyway. In fact, I'm not even going to run it with the 3.25" pulleys I ran last year. I'm switching to 3.6" pulleys to drop the boost to 3 lbs, about 575 horsepower. I want just enough power to drive past you and your twin cousin Tom, The beakboater.
. Put the Stern Locks on today for some added security 
