Can I get some pics of the bolster/rear seat and the distance from the console to the back of the rear seat. I'm looking at a boat that has a pretty far aft console, like the Concept. It has NO interior (was built for fishing) so I'm trying to get a leg up on seeing if I can fit a bolster and a rear seat and have reasonible room to get around.

Thanks as always - Greg

I can't get the measurements for you because the boat is shrink wrapped and it's snowing/raining like hell here. If you call Dave at Typhoon Marine 732-477-6157 I'm sure he can get them for you.

another

last one

Greg,

Right now all of my 36's are shrink wrapped.

I have a 30 here in my showroom if you think that might help you out?

I would suggest finding a bolster you like and get the measurements of that and then measure your boat.

Thanks for the pics. I've got sort of the same problem getting access to measurements, the boat is in FL and I'm in MD. If I can get someone to take a look and some pics for me I'll ask them to drag a tape measure along too (as long as I'm begging I might as well go all the way, right?).

Thanks - Greg

It's not a concept but it might give you an idea of distance. 31 Cig center console.
Cordell

That looks more like a 32 Active Thunder

1

when the pic resized it made the numbers small.
10'8" from bow to cockpit
5'10" in front between cabin and console base
4'4" for console
2' from console to seat post
3'3" from seat base to rear seat base
1'6" for rear seat
17" between console and side of boat
6'7" from side to side

This is from a 1987 31 foot Cig decathlon

Cordell