It Was Not A Good Weekend!!!
#12
Registered
VIP Member
Thread Starter
Join Date: Mar 2001
Location: Mississippi
Posts: 1,454
Likes: 0
Received 0 Likes
on
0 Posts
I HAVE LOOKED IN THE TECH SECTION AND CAN'T FIND ANYTHING! SURE WOULD BE QUICKER TO OPEN THE BACK AND A PLATE WOULD LOOK BETTER THAN TWO PLUGS.
I HAVE A YARD FULL OF BOATS THAT I COULD BE WORKING ON INSTED OF MINE
I HAVE A YARD FULL OF BOATS THAT I COULD BE WORKING ON INSTED OF MINE
#14
Here is the link to JR Marine.
This is the fix I used on mine last season. Ron was very helpful and the kit worked out and is holding up very well.
http://www.jrmarine.com/instructions.htm
This is the fix I used on mine last season. Ron was very helpful and the kit worked out and is holding up very well.
http://www.jrmarine.com/instructions.htm
#15
Offshore Cowboy
Platinum Member
I had Ron (Wildthing Taz) re-fit the female part my swivel goes thru in the gimble. My mechanics were FLOORED at how "original/stock" it looked.
Thanks, Ron! You've got all my referrals!!!!!!
Thanks, Ron! You've got all my referrals!!!!!!