Help me catch this guy!
04-12-2004 | 10:35 AM
#61
Registered User
Joined: Oct 2002
Posts: 2,260
Likes: 0
From: MIAMI WHERE ELSE
This is sick to read, if it would have been the mayors or the police chief boat, the thief would have been in jail now. I would take the motor apart to inspect for loose nuts in the valve train.
04-12-2004 | 04:58 PM
#62
Registered
Joined: Jan 2002
Posts: 468
Likes: 0
From: McHenry, IL
Wally,
The damage done is just sickening. If you want, bring the boat over to my warehouse and I'd be happy to help you clean it up. The heads do have passages large enough to allow nuts, bolts, etc. to get down into the lifter gallery or below. It's possible they were going for the heads as well. I don't even want to comment on the cop's response. That's like saying an attractive women should expect to be raped. Please call me if there's ANYTHING I can help you with.
Sincerely,
Mark S.
The damage done is just sickening. If you want, bring the boat over to my warehouse and I'd be happy to help you clean it up. The heads do have passages large enough to allow nuts, bolts, etc. to get down into the lifter gallery or below. It's possible they were going for the heads as well. I don't even want to comment on the cop's response. That's like saying an attractive women should expect to be raped. Please call me if there's ANYTHING I can help you with.
Sincerely,
Mark S.
04-12-2004 | 06:14 PM
#63
Registered
Joined: Sep 2002
Posts: 3,606
Likes: 0
From: Lewis Center, Ohio
Originally posted by Griff
Whomever told you that it cost $2200 to run prints is full o crap. If the prints are in a local data base, it takes about an hour of labor for a tech to match prints, maybe more, maybe less, depending on the quality of the print.
Whomever told you that it cost $2200 to run prints is full o crap. If the prints are in a local data base, it takes about an hour of labor for a tech to match prints, maybe more, maybe less, depending on the quality of the print.
