Is this under your floor?
#13
Registered
Join Date: Dec 2002
Location: Tampa Florida
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Joker,
Not sure if you have detailed any info on this boat in another thread but can you give us some specs? I went to your website but nothing was available for the rescue 30.
Are you going to be using a engine bracket for the rescue?
Is this Hull # 1? If so, Do you have a rendering of the completed boats or is this just a hobby?
J Mitch
Not sure if you have detailed any info on this boat in another thread but can you give us some specs? I went to your website but nothing was available for the rescue 30.
Are you going to be using a engine bracket for the rescue?
Is this Hull # 1? If so, Do you have a rendering of the completed boats or is this just a hobby?
J Mitch
#14
Registered
Platinum Member
Thread Starter
Join Date: Nov 2000
Location: Lake Lanier - N. Georgia
Posts: 6,307
Likes: 0
Received 1 Like
on
1 Post
This is the same hull from my race / pleasure boats and it's a twin step with a notched transom. The boat will have a bracket. I'm a small custom mfg but I don't build boats for a living. This actual boat will be a rescue / tow boat - BH