Agreed! Thank you for your service and keep the pics coming!!!

Everything hurts... and I itch....
 

https://cimg9.ibsrv.net/gimg/www.off...5c082a56d7.jpg
Rest of the floor came out,, darn squishy wood..
https://cimg5.ibsrv.net/gimg/www.off...d15b4b3727.jpg
Replaced stringer and new floor
https://cimg7.ibsrv.net/gimg/www.off...01703dd367.jpg
Rear wall was also not in good shape.. saws-all at it again
https://cimg9.ibsrv.net/gimg/www.off...01a2e96c56.jpg
Fitment was tough, because of the shape...
https://cimg4.ibsrv.net/gimg/www.off...7ea0d72e8f.jpg
https://cimg6.ibsrv.net/gimg/www.off...23134111f4.jpg
https://cimg7.ibsrv.net/gimg/www.off...ee0e30f13c.jpg
Rear seat going back in
https://cimg8.ibsrv.net/gimg/www.off...5722075126.jpg
Dad didnt make the dash big enough so i decided to take some notes from early 80s boats and make something work, it will all be glassed in and sealeld

No poly...
 

Im using all slow cure west systems epoxy, milled fibers for filler, 8lb structure foam, and some blood, haha

Thank you
 

Thank you for reviving this thread.

https://cimg3.ibsrv.net/gimg/www.off...385f269f5.jpeg
https://cimg8.ibsrv.net/gimg/www.off...0bf659701.jpeg
Test fitting the control box, the seat fits nice and its comfortable, it shall do.
https://cimg2.ibsrv.net/gimg/www.off...152e5ea48.jpeg
Picked up an access hatch, cut to fit, I’ll mount it when paint is on.
https://cimg0.ibsrv.net/gimg/www.off...bc58c9676.jpeg
I used Dad’s existing Coosa as the support, back filled with 8lb foam then structural glass/epoxy, I decided to go with the open storage under the seat on the sides with the center closed off, center is the access to the fuel pickup/ sending unit.
https://cimg1.ibsrv.net/gimg/www.off...c32913b84.jpeg
https://cimg4.ibsrv.net/gimg/www.off...e6f01da51.jpeg
Filling/sealing the gauge cluster

Difficult to work on this, and run a buisness at the same time… also, why didn’t anyone tell me this boat stuff is expensive???

https://cimg2.ibsrv.net/gimg/www.off...82edae6fd.jpeg
https://cimg3.ibsrv.net/gimg/www.off...7c2008a99.jpeg
https://cimg4.ibsrv.net/gimg/www.off...2d8dcad4c.jpeg
https://cimg5.ibsrv.net/gimg/www.off...e3c0df865.jpeg
https://cimg6.ibsrv.net/gimg/www.off...d1e5dda0b.jpeg
https://cimg7.ibsrv.net/gimg/www.off...1617ffbb5.jpeg
https://cimg8.ibsrv.net/gimg/www.off...8edf49308.jpeg
https://cimg9.ibsrv.net/gimg/www.off...035c264ed.jpeg


The filler, I got most of the way with Epoxy and microbaloons, now were down to the thin body filler and blocks… my arms are already tired.