![]() |
Re: Single Engine Cat Guys?
That is what I am thinking as well Cord, but I am keeping 100 as my target. If everything is right 110+ is very possible!! Getting everything right takes some time and experimentation as we all know, and money as well!!
Craig |
Re: Single Engine Cat Guys?
1 Attachment(s)
Hi Sean:
Can you guys post some pictures? I like the single engine cats. What would you think about big single engine cat like a 30 Spectre or Cobra with big power and two drives on a custom splitter box from IMCO. Get the drives behind the sponsons and counter rotate. Should be more stable? Just a wild idea I have because of some parts laying around. |
Re: Single Engine Cat Guys?
Originally Posted by tomcat
Hi Sean:
What would you think about big single engine cat like a 30 Spectre or Cobra with big power and two drives on a custom splitter box from IMCO. I would be cool, If you could get the motor installed in the center of the boat, without it sitting completely above the rear hatch. No center pod on the Spectre. |
Re: Single Engine Cat Guys?
Tom, I would think you have too much time on your hands and your mind keeps wandering off into the twilight zone :) NOT that theres any thing wrong with that :):)
What measurements did you need from my cat Tom? shes all back together now and waiting for a weekend thats not pissin rain! |
Re: Single Engine Cat Guys?
Yeah I forgot about the center pod. Would have to use Daytona or HTM.
Sean - I'll call you today. |
Re: Single Engine Cat Guys?
1 Attachment(s)
Here is how mine has done to date.
Crate 502 PrCharger 9# boost a bit over 100 HTM claimed 600hp 7.4 Procharger 9# boost 87 ProCharger claimed it had 500hp 540 n/a 93 no idea on the hp Now I am building a 525sc. |
Re: Single Engine Cat Guys?
Just sold my 25 Daytona, had it dialed in as a reliable bang for buck combo, 454 magefi with whipple @7.5 lbs for 650 at the crank. XZ 1.36, with 1.5" shorty and labbed 30, best of 99.0 at 1125 feet of elevation in fresh water. I miss that boat :(
|
Re: Single Engine Cat Guys?
Currently having a 502ci / 750hp motor installed in my 2001 American Offshore 2600. I do not have any speeds yet, but hope to be close to or over 100mph. Hopefully Wette Vette doesn't run away from me too bad.
|
Re: Single Engine Cat Guys?
Just sold my HTM SR24 with a pfaff blown 598 c.i. and every drive known to man behind it at one time or another 134.3 mph on radar was the fastest I ran it but it would cruise all day at a 110-115. I'm steppin up too somthin a little bigger
|
Re: Single Engine Cat Guys?
Originally Posted by EvoB
Just sold my HTM SR24 with a pfaff blown 598 c.i. and every drive known to man behind it at one time or another 134.3 mph on radar was the fastest I ran it but it would cruise all day at a 110-115. I'm steppin up too somthin a little bigger
|
| All times are GMT -5. The time now is 05:29 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.