updating power

Old 06-12-2004, 11:36 AM
  #1  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default updating power

here are some photo's of a repower job on a 42 fountain with number 5's.

The first pic , the motors have been in and out, new mounts made, and engine compartment will be cleaned and painted with white imron.
Attached Thumbnails updating power-lining-up-motor-mounts.jpg  
Pete B is offline  
Old 06-12-2004, 11:38 AM
  #2  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

after paint , thru hulls and strainers installed.
Attached Thumbnails updating power-water-pichups-shut-offs.jpg   updating power-fuel-pumps.jpg   updating power-strainers-2.jpg  


Last edited by Pete B; 06-12-2004 at 11:43 AM. Reason: sp
Pete B is offline  
Old 06-12-2004, 11:40 AM
  #3  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

then comes the fun part, time for the motors , and the project really takes shape
Attached Thumbnails updating power-5-tas.jpg   updating power-motor-hoist.jpg   updating power-side-view-starb-motor.jpg  

Pete B is offline  
Old 06-12-2004, 11:42 AM
  #4  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

with alignment good time for the drives.
Attached Thumbnails updating power-business-end.jpg   updating power-number-5s.jpg  
Pete B is offline  
Old 06-12-2004, 11:44 AM
  #5  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

more pics added later also added to drives imco wing plates, and tie bar.

Last edited by Pete B; 06-12-2004 at 11:47 AM.
Pete B is offline  
Old 06-12-2004, 11:45 AM
  #6  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

all work was done a Page Racing, in Ft, Myers Florida.
Pete B is offline  
Old 06-12-2004, 11:46 AM
  #7  
Charter Member#203
Charter Member
Thread Starter
 
Pete B's Avatar
 
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 15,337
Default Re: updating power

Engines are Innovation 900's !
Pete B is offline  
Old 06-12-2004, 11:58 AM
  #8  
Registered
 
Downtown42's Avatar
 
Join Date: Nov 2003
Location: 1 Flu Ovr KuKos Nest-WI
Posts: 9,950
Default Re: updating power

looks good pics of boat??
Downtown42 is offline  
Old 06-13-2004, 03:06 AM
  #9  
Registered
 
2112's Avatar
 
Join Date: Dec 2003
Location: Socialist Republic of Washington State
Posts: 1,970
Default Re: updating power

Originally Posted by Pete B
more pics added later also added to drives imco wing plates, and tie bar.

Is it a stepped boat?

If so, how far down below the bottom do you put your water pick ups to get in good water?

How much speed will they scrub off in your estimation?

Thanks
2112 is offline  
Old 06-13-2004, 10:58 AM
  #10  
Rob
VIP Member
iTrader: (6)
 
Strip Poker 388's Avatar
 
Join Date: Aug 2001
Location: Ms
Posts: 21,608
Default Re: updating power

Now thats a naked bottom



Looking good
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  

Quick Reply: updating power


OSO Sponsor
OSO Advertiser
OSO Advertiser

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

OSO Advertiser