Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Information on Chief motors (https://www.offshoreonly.com/forums/general-boating-discussion/82905-information-chief-motors.html)

SR-24 07-09-2004 12:25 PM

Re: Information on Chief motors
 
Tonto, it was here on the board in some thread, but it's probably been at least two years ago. Like I said, all his stuff looked good to me from what I saw. His displays were top notch and I would think that somebody who puts that much time into their displays probably puts that much time and effort into their product as well.

knotpropr 07-09-2004 12:45 PM

Re: Information on Chief motors
 
Really good guy and nice stuff
www.chiefengines.com

SteveDavid 07-09-2004 01:32 PM

Re: Information on Chief motors
 
I've been running Chiefs for 3 years in a triple engine set up, injected and supercharged with -0- problems. First class folks in every respect.

Steve David

SR-24 07-09-2004 01:35 PM

Re: Information on Chief motors
 
Steve, what kind of superchargers are you running on your engines?

Lmarth 07-09-2004 02:09 PM

Re: Information on Chief motors
 
I just checked Chief's web site-Merlin Blocks, Lunati cranks,Oliver rods. Good stuff. I guess I wasn't losing it after all!--Lou

Spine Tingler 07-09-2004 02:26 PM

Re: Information on Chief motors
 
I have heard a lot of good things today and I talked with Tommy yesterday and he was very helpful. Anyone who has Chief's please let me know about longevity and maintenance.

Downtown42 07-09-2004 02:40 PM

Re: Information on Chief motors
 

Originally Posted by welladjusted
I have heard a lot of good things today and I talked with Tommy yesterday and he was very helpful. Anyone who has Chief's please let me know about longevity and maintenance.

p/m sgrady. He may be out at Smoke Run this weekend. I have talked to him re: Chief and he is very aware of what's going on. He has a pre-designated maintenence schedule and replaces/tunes BEFORE it breaks. Been with Chief for years. :)

SteveDavid 07-09-2004 02:50 PM

Re: Information on Chief motors
 
SR 24: They are Whipples atop a base 500 EFI. The only change from the original Merc 500 EFI was the addition of Merlin heads. Tommy used them in lieu of the existing heads for higher torque. They average 710 HP at 730 lbs of torque @5,500. The bulk of the torque is in the mid 3000 rpm range.

Take care,
Steve

MIAMIBOYZ 07-09-2004 03:00 PM

Re: Information on Chief motors
 

Originally Posted by Tonto
SR-24
Where did you hear this from? I am currently at CHIEF right now putting my new 950's in my 41, and I can assure you that there IS nothing but top shelf equipment in ALL of Tommy's engines.

Hey Albert, what's up? Come by sometime.

Robert


Robert some people talk a whole lot of crap for the sake of what.
I`m real busy racing, I just won two races in a row, Marathon and
Sarasota and I race next weekend in Dania. So you are getting the
APACHE ready with those pretty in pink blower motors. :) Good luck
Robert and say hello to the tribe at CHIEF ENGINES.

Albert

OffshoreOnly 07-09-2004 03:52 PM

Re: Information on Chief motors
 
Sr-24 is remembering a thread when a person (who is no longer around) took a boat with a pair of Chiefs and robbed parts to replace them with inferior parts and then sell the parts. Therefore, when the motors were tore down the less desirable parts were found. Not Chiefs fault at all. Just to set the record straight.


All times are GMT -5. The time now is 05:44 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.