Project Dragon@Martin Offshore
10-25-2004 | 11:03 AM
#32
Registered
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Re: Project Dragon@Martin Offshore
gotta ask , what kind of prepping goes into the boat for paint. carbon ,and epoxy is not the easiest to paint. i painted a lanceair4 plane that was carbon and it was a pain to prep and paint. we cleaned the hell out of it and went with epoxy primer(dp lead free) and then the fill primer. just curious with the painted bottom, i know from following the build that the DRAGON is as straight as it gets. 
10-25-2004 | 01:40 PM
#34
Registered
Joined: Nov 2002
Posts: 4,977
Likes: 1
From: SBRT Southwest
Re: Project Dragon@Martin Offshore
Originally Posted by open72
gotta ask , what kind of prepping goes into the boat for paint. carbon ,and epoxy is not the easiest to paint. i painted a lanceair4 plane that was carbon and it was a pain to prep and paint. we cleaned the hell out of it and went with epoxy primer(dp lead free) and then the fill primer. just curious with the painted bottom, i know from following the build that the DRAGON is as straight as it gets.
Check it out. I learned a lot.
