My dyno Pics
#1
Registered

Thread Starter
Join Date: Dec 2003
Location: Metairie,La
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts

[email protected] Marine dynoed my 502cid Last Wed and Thursday and it made right over 500hp.The motor is a 502 with Edelbrock heads and intake and an 850 Holey Carb.Here are a few pics that I took.
#3
Platinum Member

iTrader: (1)

Can you post a copy of your dyno sheet and parts combination in the tech section for all these guys who are trying to decide where to spend money on there combos this winter,It would be greatly appreciated,Smitty
#4
Registered

Thread Starter
Join Date: Dec 2003
Location: Metairie,La
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts

I will call Mark tomorrow and get the sheets.
THe motor is 502 cid Edelbrock Performer RPM heads and intake,MSD ing,CMI big tubes,9.6:1 compression and I will have to look up the specs on the cam.The motor made peak power @5300 Rpms.It also has a Hardin Marine 10qt pan.
THe motor is 502 cid Edelbrock Performer RPM heads and intake,MSD ing,CMI big tubes,9.6:1 compression and I will have to look up the specs on the cam.The motor made peak power @5300 Rpms.It also has a Hardin Marine 10qt pan.
Thread
Thread Starter
Forum
Replies
Last Post
drypipetiger
General Boating Discussion
65
11-11-2005 06:01 PM