Thanks to D-hlaw!
#31
Thread Starter
Registered

Joined: Dec 2003
Posts: 1,991
Likes: 13
From: Socialist Republic of Washington State
Lots of projects in the works right now. I am fabbing the motormounts and doing all the rigging. Dan Fitzgerald is going throught the drives and stellings is on the headers. Will be out there come spring.
:
:
#33
Thread Starter
Registered

Joined: Dec 2003
Posts: 1,991
Likes: 13
From: Socialist Republic of Washington State
Drives out, nose up and less than 70mph?
I am anxious to hear how your new ride turns. If I recall correctly, the yellow boat was side by side and the canopy boat is staggered. I am curious if the lower drive position helps keep you planted. Also, how much help are the Arenson trim tabs?
We need a blow by blow analysis as you dial her in

I am anxious to hear how your new ride turns. If I recall correctly, the yellow boat was side by side and the canopy boat is staggered. I am curious if the lower drive position helps keep you planted. Also, how much help are the Arenson trim tabs?
We need a blow by blow analysis as you dial her in






