![]() |
cig repo
|
Re: cig repo
no trailer and needs drives and stereo...engine cond? It should be interesting to see what it gets
|
Re: cig repo
that was a NM boat wasn't it?
|
Re: cig repo
Originally Posted by Sean H
that was a NM boat wasn't it?
|
Re: cig repo
Affirmative. I saw it at the FL facility shortly before the demise; in same condition as above.
|
Re: cig repo
Looks like it could be a Lip-Ship when originally sold usually the grey background on the Cig signs is Phil's mo.
|
Re: cig repo
Originally Posted by GLH
Looks like it could be a Lip-Ship when originally sold usually the grey background on the Cig signs is Phil's mo.
LS JR. |
Re: cig repo
Originally Posted by lucky strike
I don't think it is. I'm 98% sure National had it built. I saw that too though ;)
LS JR. Don't know who had it built but it definitaly looks like a National Marine de-built ... :rolleyes: |
Re: cig repo
160k min? with no drives or trailer and who know what small parts are missing... :rolleyes:
|
Re: cig repo
Sure is pretty.
|
Re: cig repo
I talked to the rep at the NL in Cleveland about bidding, he told me the minimum bid is just a suggested amount...You can bid as low as you want. Bids are opened every Monday at 4:00pm and the highest is taken to the bank for acceptance. I believe each bid cost $20??? I never bid but thought about it, good luck. :p :confused:
|
Re: cig repo
i want that boat
|
Re: cig repo
Originally Posted by mkramer
I talked to the rep at the NL in Cleveland about bidding, he told me the minimum bid is just a suggested amount...You can bid as low as you want. Bids are opened every Monday at 4:00pm and the highest is taken to the bank for acceptance. I believe each bid cost $20??? I never bid but thought about it, good luck. :p :confused:
I placed a bid on the 38 TG they had. |
Re: cig repo
Originally Posted by LostinBoston
i think the fee is a one time registering fee. it hink they also charge a deposit with each bid which is returned if you did not hav the highest bid or if the back rejected your bid.
I placed a bid on the 38 TG they had. |
Re: cig repo
Anyone who would pay 160K for that boat needs to have their head examined!!!!! :rolleyes: :cool:
What would 2 XR's and an ITS transom assembly cost, just for starters? Didn't Jeffreys friend just sell one that was perfect with less than 50 hours on it for $175K? |
Re: cig repo
Originally Posted by craig223
Anyone who would pay 160K for that boat needs to have their head examined!!!!! :rolleyes: :cool:
What would 2 XR's and an ITS transom assembly cost, just for starters? Didn't Jeffreys friend just sell one that was perfect with less than 50 hours on it for $175K? LS JR. |
Re: cig repo
That's what I was thinking Bobby and that is assuming that everything else is there!!!!
I wouldn't offer more that $125K for it....after a survey of course :cool: |
Re: cig repo
Originally Posted by craig223
That's what I was thinking Bobby and that is assuming that everything else is there!!!!
I wouldn't offer more that $125K for it....after a survey of course :cool: LS JR. |
Re: cig repo
Originally Posted by lucky strike
Oh well, see you in Miami :drink:
LS JR. Shouldn't you be studying???? :p :p |
Re: cig repo
Originally Posted by craig223
I can't wait!!!!! :evilb: :evilb: :evilb:
Shouldn't you be studying???? :p :p |
Re: cig repo
I can only imagine if the scum bags stripped it I bet all 60+ hours are Rough 1's :D
|
Re: cig repo
did they have that on the 03 KW poker run? if it is, they ran it pretty hard then too...
|
Re: cig repo
I always thought that was funny when you see a saleman in a boat at a poker run beating a boat into the ground then they go back wash it wax it and put it up 4 sale with low hours just from test drives LOL ok yea right :D :drink:
|
Re: cig repo
exactly..... and those NM boats were always out front..... :rolleyes:
|
Re: cig repo
whats underneath in those Gladiators? Is the cabin non-existant? Do they all come that way? They are such a pretty boat in person.
I saw one in Havasu last fall and it looked like there was no rub-rail. Was I correct or did I just not get a good look at it? |
Re: cig repo
Originally Posted by BADKACHINA
whats underneath in those Gladiators? Is the cabin non-existant? Do they all come that way? They are such a pretty boat in person.
I saw one in Havasu last fall and it looked like there was no rub-rail. Was I correct or did I just not get a good look at it? LS JR. |
Re: cig repo
that must be alot of work to seam the top and bottom together with no rail and make it look so good. It makes the bow look so smooth and pointy, awesome boat...........
|
Re: cig repo
3 Attachment(s)
Originally Posted by BADKACHINA
that must be alot of work to seam the top and bottom together with no rail and make it look so good. It makes the bow look so smooth and pointy, awesome boat...........
LS JR. |
Re: cig repo
Originally Posted by craig223
Anyone who would pay 160K for that boat needs to have their head examined!!!!! :rolleyes: :cool:
What would 2 XR's and an ITS transom assembly cost, just for starters? Didn't Jeffreys friend just sell one that was perfect with less than 50 hours on it for $175K? i have to agree with you my good man. |
| All times are GMT -5. The time now is 01:41 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.