Molds on ebay
#11
Charter Member #232
Charter Member
Re: Molds on ebay
I emailed the guy for more information and he sent me back a email directing me to the ebay add. So I figured that the had put more pictures up. When I opened it up it was the same old add
__________________
Put your best foot forward!
Put your best foot forward!
#12
Registered
Thread Starter
Re: Molds on ebay
Originally Posted by Audiofn
I emailed the guy for more information and he sent me back a email directing me to the ebay add. So I figured that the had put more pictures up. When I opened it up it was the same old add
#14
A to Z
Platinum Member
Re: Molds on ebay
Originally Posted by Pantera1
I think its a pretty sharp boat .. Lookin for venture capital ..anyone ?
http://www.activethunderboats.com/Ebaycat.htm
http://www.activethunderboats.com/Ebaycat.htm
is it just me or does that look way wider that 8'10"......
#15
Registered
Thread Starter
Re: Molds on ebay
Originally Posted by Sean H
is it just me or does that look way wider that 8'10"......
#18
Charter Member #232
Charter Member
Re: Molds on ebay
Pantera I was looking for pictures of the actuall mold not what it was sapposed to make. If the molds are beat up they could be worthless, if in good shape then they may be very valuable.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#19
Charter Member #232
Charter Member
Re: Molds on ebay
I have a good friend in MA that builds boat with the best of everything. I can check with him how much he would charge to make you a hull with quality stuff. I should go over and say hi to him anyhow. Been bussy so I have not had time to run over. He used to be the best foil (America's Cup Boat Keels and Rudders) guy in the world tell everyone started to use CNC machines. This is the boat that he builds.
__________________
Put your best foot forward!
Put your best foot forward!
#20
Charter Member #232
Charter Member
Re: Molds on ebay
If you want to talk to him then let me know I can set up a get together with you. I would also be willing to look at splitting the cost of the molds.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!