Re: Molds on ebay
Originally Posted by ATPatrick
The people who bid away knew what the molds were. The link was clear and the second page shows the molds. A quick polish and 5 or 6 coats of release wax and they are good to go. I didn't answer phone calls or spend much time on e-mails because I knew they were sold one way or the other. We'll see if the deal goes through. At this point it looks like it though.
|
Re: Molds on ebay
someone give me a link to the next page pictures.....
|
Re: Molds on ebay
Go to first page and scroll down :D
|
Re: Molds on ebay
|
Re: Molds on ebay
ANd don't be deleting all the posts. You're right, I did a crap job listing them.
Should have cleaned them up, taken better pictures and then stuck them on E-bay. |
Re: Molds on ebay
Curious why you arnt building this boat anymore ?
|
Re: Molds on ebay
I ran it to $8350 just trusting they were good but they looked pretty good from the picture and any small repairs are easy. Let me know if it falls through. By the way who bought them?
|
Just saw this thread, I bought the molds and am finishing the tooling for the new deck, Pat was a good man to deal with and he was correct I did know what the molds were
|
the old style step down rub rail at the back is definately dated looking. Those boats seemed to like a lite lay up to run there best.
|
No rub rail at all now, when you say light was best do you have any idea of total weight, bare hull, Thanks
|
All times are GMT -5. The time now is 01:14 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.