I'm going to replace the rub rail on my 10 Meter. Who has the best bargain on an ordinary white rigid rail. The best I've found is rub rails .com at $3.10 a foot. Is that as good as it gets?

Thanks,

Bryan

You can buy directly from this manufacturer... www.wefcorubber.com .. They are in the Los Angeles area... I've bought automotive stuff from them in the past... Good products and there is a PDF catalog available online.

You also may want to take a peak at Rubrails.com

Have you priced it from TACO, original supplier for Fountain? I just ordered the insert for mine from West Marine's special order dept., who is a supplier for Taco. Can't buy direct from Taco, have to go thru a dealer

http://www.tacomarine.com/support/or..._rail_repl.htm

i got the solid (Fountain style) vinyl Taco stuff from BoatUS. seemed to be about the best price i could find. Definetly a two or three man job but not to bad once you get it going. get a really good heat gun too.

Thanks guys. I spoke with Taco at the show. I couldn't beg, borrow, or steal a rub rail from them. Rubrails.com is the best price I've found so far. Boat US is just a couple of dollars more.

I've looked at the rubrail.com site, and I can't figure out which one this is. Any help? 1986 Formula.

Cuda,

To me it looks like pn. RIG-88 (Rubrails.com) or Taco pn. V21-3670. It looks to be the same as on my Fountain, (just mounted opposite to mine). If you measure it, top to bottom should be around 1 7/8" and 1/4" at it's widest point.

Bryan